5 open source boards using the NSG2065Q
Real designs built with the NSG2065Q, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OpenESC-20x20
OpenDrone-hw
31.2 × 33 mm180 parts6LCERN-OHL-S-2.0243
4in1-panel
41.6 × 80.4 mm249 parts6LCERN-OHL-S-2.045
VENDETTAESC
Caped-Crussader
40.5 × 43 mm222 parts6LCERN-OHL-S-2.028
Esc
cookiemonsternz
28.3 × 28.3 mm132 parts6LNo license5
4in1
41.6 × 42.5 mm187 parts6LCERN-OHL-S-2.045
The NSG2065Q in open source designs
The gallery holds 5 open source boards using the NSG2065Q from 4 GitHub repositories; a typical one measures about 40.5 × 42.5 mm and carries around 187 components.
100% use four copper layers or more, and 80% carry an open source license.
The most starred is OpenESC-20x20 by OpenDrone-hw.
Parts used alongside the NSG2065Q
What boards using the NSG2065Q are built for
NSG2065Q: common questions
Where can I find a NSG2065Q reference design?
Each of the 5 boards on this page is a real design using the NSG2065Q. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the NSG2065Q?
The AT32F421G8U7, TLV76733DRVR, INA186A3IDCKR, FTC160808S4R7MBCA and LMR54406DBVR appear in the most repositories here.
How big is a typical board using the NSG2065Q?
The median is 40.5 × 42.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the NSG2065Q?
By GitHub stars, OpenESC-20x20 by OpenDrone-hw, with 243 stars.
Can I simulate one of these boards using the NSG2065Q before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.