9 open source boards using the RP2350A-QFN60
Real designs built with the RP2350A-QFN60, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Arctyx-Nano
Keyaan-07
51 × 21 mm63 parts4LMIT123
RP2040/RP2350PicoKey
34.5 × 18.5 mm36 parts2LMIT8
RP2040/RP2350RP2350-Eins
red-scorp
68.6 × 53.3 mm70 parts4LNo license5
RP2040/RP2350RP2350-ProMini
17.8 × 41.9 mm46 parts4LNo license4
RP2040/RP2350VikramSat-RF-subsystem
Astralis1409
72 × 72 mm89 parts4LMIT2
RP2040/RP2350Devboardrp2350
espcaa
59.2 × 26.4 mm43 parts4LNo license2
RP2040/RP2350Rp2350-boards
abzman
21 × 66.9 mm62 parts2LUnlicense1
RP2040/RP2350Wuard core v1
wuard
17.8 × 19.9 mm28 parts2LCERN-OHL-S-2.01
RP2040/RP2350Devbackup
33.6 × 25.4 mm41 parts2LNo license2
The RP2350A-QFN60 in open source designs
The gallery holds 9 open source boards using the RP2350A-QFN60 from 8 GitHub repositories; a typical one measures about 34.5 × 26.4 mm and carries around 46 components.
56% use four copper layers or more, and 56% carry an open source license.
The most starred is Arctyx-Nano by Keyaan-07.
Parts used alongside the RP2350A-QFN60
Microcontrollers on boards using the RP2350A-QFN60
What boards using the RP2350A-QFN60 are built for
RP2350A-QFN60: common questions
Where can I find a RP2350A-QFN60 reference design?
Each of the 9 boards on this page is a real design using the RP2350A-QFN60. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the RP2350A-QFN60?
The W25Q128JVS, AMS1117S-3.3 and W25Q128JVEIQ appear in the most repositories here.
Which microcontrollers do boards using the RP2350A-QFN60 use?
Most are built on RP2040/RP2350 (9).
How big is a typical board using the RP2350A-QFN60?
The median is 34.5 × 26.4 mm, and 44% are two-layer designs.
What is the most popular open source board using the RP2350A-QFN60?
By GitHub stars, Arctyx-Nano by Keyaan-07, with 123 stars.
Can I simulate one of these boards using the RP2350A-QFN60 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.