11 open source boards using the RV-3028-C7
Real designs built with the RV-3028-C7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
V5 main
zynthian
245.2 × 100 mm144 parts2LNo license154
ESP32Dpf load monitor wide
v-cu
50 × 23 mm106 parts6LCC-BY-NC-4.01
Microchip SAMSamd51 gps alarm clock
KrHaaland
80 × 50 mm149 parts2LNo license0
ESP32Alec main
eshelton328
64 × 56 mm112 parts4LNo license0
ESP32Goofy ahh epaper watch
haohaohaoyan
66 × 36 mm50 parts2LNo license0
Microsensor board
BeeEyeIoT
27 × 26 mm20 parts4LNo license0
Raspberry PiInki
c0de111
47.2 × 55.5 mm54 parts2LApache-2.033
Microchip SAMGNSS Alarm Clock
80 × 50 mm146 parts4LNo license0
ESP32Esp32s3-devkit-5v
64 × 56 mm112 parts4LNo license0
ESP32Zone syntax test
gokcesena53
90 × 55 mm89 parts4LMIT0
ESP32Alec sensor
64 × 56 mm88 parts4LNo license0
The RV-3028-C7 in open source designs
The gallery holds 11 open source boards using the RV-3028-C7 from 8 GitHub repositories; a typical one measures about 64 × 55 mm and carries around 106 components.
64% use four copper layers or more, and 18% carry an open source license.
The most starred is V5 main by zynthian.
Parts used alongside the RV-3028-C7
Microcontrollers on boards using the RV-3028-C7
What boards using the RV-3028-C7 are built for
RV-3028-C7: common questions
Where can I find a RV-3028-C7 reference design?
Each of the 11 boards on this page is a real design using the RV-3028-C7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the RV-3028-C7?
The DS3231M, TPS61023DRLR and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the RV-3028-C7 use?
Most are built on ESP32 (6), Microchip SAM (2) and Raspberry Pi (1).
How big is a typical board using the RV-3028-C7?
The median is 64 × 55 mm, and 36% are two-layer designs.
What is the most popular open source board using the RV-3028-C7?
By GitHub stars, V5 main by zynthian, with 154 stars.
Can I simulate one of these boards using the RV-3028-C7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.