14 open source boards using the SC4215
Real designs built with the SC4215, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32PickleRick
icl-rocketry
100 × 37 mm196 parts6LMIT2
ESP32Altimeter
37.5 × 25 mm80 parts4LNo license1
ESP32Ricardo-Stark
117 × 49 mm298 parts6LNo license0
ESP32Ricardo-Kermit
85 × 43 mm194 parts4LMIT0
ESP32Ricardo-LightningMcQueen
59 × 50 mm135 parts4LNo license0
ESP32Ricardo-BlackBox
80.3 × 54.1 mm69 parts4LNo license0
ESP32Altimeter thin
54.5 × 19 mm80 parts4LNo license1
ESP32Ricardo-BlackBoxNEW
49.9 × 46.6 mm69 parts4LNo license0
ESP32Артёмитер
54.5 × 18 mm79 parts4LNo license1
ESP32NewRicardBlackBox
124.7 × 36.8 mm65 parts4LNo license0
ESP32Altimeter super thin
54.5 × 18 mm79 parts4LNo license1
ESP32RicardoTemplate
127 × 36.8 mm65 parts2LNo license0
ESP32Ricardo-BlackBoxNEWFinal
62 × 32 mm63 parts4LNo license0
ESP32RicardoBlackBox
47.1 × 50.6 mm55 parts2LNo license0
The SC4215 in open source designs
The gallery holds 14 open source boards using the SC4215 from 6 GitHub repositories; a typical one measures about 60.5 × 36.9 mm and carries around 79 components.
86% use four copper layers or more, and 14% carry an open source license.
The most starred is PickleRick by icl-rocketry.
Parts used alongside the SC4215
Microcontrollers on boards using the SC4215
What boards using the SC4215 are built for
SC4215: common questions
Where can I find a SC4215 reference design?
Each of the 14 boards on this page is a real design using the SC4215. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SC4215?
The ESP32-S3, MAX77827AEFD+T, SN65HVD230, LM66200DRLR and AP2205-W5-7 appear in the most repositories here.
Which microcontrollers do boards using the SC4215 use?
Most are built on ESP32 (14).
How big is a typical board using the SC4215?
The median is 60.5 × 36.9 mm, and 14% are two-layer designs.
What is the most popular open source board using the SC4215?
By GitHub stars, PickleRick by icl-rocketry, with 2 stars.
Can I simulate one of these boards using the SC4215 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.