11 open source boards using the SPX3819M5-L-3-3
Real designs built with the SPX3819M5-L-3-3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Toern
Soundpauli
160 × 71 mm118 parts4LCC-BY-NC-4.019
HEXBERRY-V-20Q100-0.91
logitiles
65 × 40 mm186 parts4LCERN-OHL-S-2.04
STM32STM32C5-eval board
tenko
53.5 × 20 mm39 parts4LMIT2
Nordic nRFMUSIC-PLAYER
Ace6Rings
50 × 50 mm93 parts6LMIT0
TI-MSPM0
marwantm
60 × 34 mm29 parts2LNo license0
ESP32Tux v02
tux-friend
25 × 25 mm60 parts2LGPL-3.018
ESP32Esp32tux mini
26 × 26 mm55 parts2LGPL-3.018
PICPropulsionBoard
waterloo-rocketry
56.9 × 61.3 mm99 parts2LGPL-3.014
STM32Droneboard
nikola825
38 × 38 mm63 parts4LMIT3
PICGPS Board
54.3 × 28.9 mm41 parts2LGPL-3.014
PICDAQ CAN support
86.4 × 35.1 mm31 parts2LGPL-3.014
The SPX3819M5-L-3-3 in open source designs
The gallery holds 11 open source boards using the SPX3819M5-L-3-3 from 8 GitHub repositories; a typical one measures about 54.3 × 35 mm and carries around 60 components.
55% are two-layer designs, the rest use four layers or more, and 82% carry an open source license.
The most starred is Toern by Soundpauli.
Parts used alongside the SPX3819M5-L-3-3
Microcontrollers on boards using the SPX3819M5-L-3-3
What boards using the SPX3819M5-L-3-3 are built for
SPX3819M5-L-3-3: common questions
Where can I find a SPX3819M5-L-3-3 reference design?
Each of the 11 boards on this page is a real design using the SPX3819M5-L-3-3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SPX3819M5-L-3-3 use?
Most are built on PIC (3), ESP32 (2), STM32 (2) and Nordic nRF (1).
How big is a typical board using the SPX3819M5-L-3-3?
The median is 54.3 × 35 mm, and 55% are two-layer designs.
What is the most popular open source board using the SPX3819M5-L-3-3?
By GitHub stars, Toern by Soundpauli, with 19 stars.
Can I simulate one of these boards using the SPX3819M5-L-3-3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.