5 open source boards using the TPS65186RGZR
Real designs built with the TPS65186RGZR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Inkplate10 Soldered
SolderedElectronics
224.8 × 162.4 mm215 parts2LTAPR-OHL-1.017
ESP32Soldered Inkplate 4 TEMPERA with glass panel
72 × 78 mm246 parts4LTAPR-OHL-1.05
ESP32Soldered Inkplate 10
224.8 × 162.4 mm215 parts2LTAPR-OHL-1.017
ESP32Soldered Inkplate 4 TEMPERA with glass panel panel
1.9 × 12 mm246 parts4LTAPR-OHL-1.05
ESP32Inkplate10 Soldered panel
224.8 × 174.4 mm214 parts2LTAPR-OHL-1.017
The TPS65186RGZR in open source designs
The gallery holds 5 open source boards using the TPS65186RGZR from 2 GitHub repositories; a typical one measures about 224.8 × 162.4 mm and carries around 215 components.
60% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Inkplate10 Soldered by SolderedElectronics.
Parts used alongside the TPS65186RGZR
Microcontrollers on boards using the TPS65186RGZR
What boards using the TPS65186RGZR are built for
TPS65186RGZR: common questions
Where can I find a TPS65186RGZR reference design?
Each of the 5 boards on this page is a real design using the TPS65186RGZR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPS65186RGZR?
The CH340C, ESP32-WROVER, MC14093BDTR2G, MCP73831T and PCAL6416AHF,128 appear in the most repositories here.
Which microcontrollers do boards using the TPS65186RGZR use?
Most are built on ESP32 (5).
How big is a typical board using the TPS65186RGZR?
The median is 224.8 × 162.4 mm, and 60% are two-layer designs.
What is the most popular open source board using the TPS65186RGZR?
By GitHub stars, Inkplate10 Soldered by SolderedElectronics, with 17 stars.
Can I simulate one of these boards using the TPS65186RGZR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.