6 open source boards using the TXU0102-DCU
Real designs built with the TXU0102-DCU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NerdOCTAXE-Gamma
Patsch91
200 × 190 mm446 parts6LCERN-OHL-S-2.093
NerdOCTAXE-Plus
155.5 × 130 mm290 parts4LCERN-OHL-S-2.033
NerdQX
IxTechCrypto
89 × 184 mm217 parts6LCERN-OHL-S-2.027
STM32Qaxe
imcmurray
89 × 137 mm192 parts4LNo license0
Nerdqaxe+
shufps
89 × 152 mm183 parts4LCERN-OHL-S-2.0244
Nerdqaxe+
89 × 152 mm183 parts4LNo license0
The TXU0102-DCU in open source designs
The gallery holds 6 open source boards using the TXU0102-DCU from 5 GitHub repositories; a typical one measures about 89 × 152 mm and carries around 205 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is Nerdqaxe+ by shufps.
Parts used alongside the TXU0102-DCU
Microcontrollers on boards using the TXU0102-DCU
What boards using the TXU0102-DCU are built for
TXU0102-DCU: common questions
Where can I find a TXU0102-DCU reference design?
Each of the 6 boards on this page is a real design using the TXU0102-DCU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TXU0102-DCU?
The 25MHZ, AP3211, CSD95472Q5MC, EMC2302-1 and MCP1824T-0802E appear in the most repositories here.
Which microcontrollers do boards using the TXU0102-DCU use?
Most are built on STM32 (1).
How big is a typical board using the TXU0102-DCU?
The median is 89 × 152 mm, and 0% are two-layer designs.
What is the most popular open source board using the TXU0102-DCU?
By GitHub stars, Nerdqaxe+ by shufps, with 244 stars.
Can I simulate one of these boards using the TXU0102-DCU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.