12 open source boards using the CSD95472Q5MC
Real designs built with the CSD95472Q5MC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NerdOCTAXE-Gamma
Patsch91
200 × 190 mm446 parts6LCERN-OHL-S-2.093NerdOCTAXE-Plus
Patsch91
155.5 × 130 mm290 parts4LCERN-OHL-S-2.033NerdQX
IxTechCrypto
89 × 184 mm217 parts6LCERN-OHL-S-2.027PC-AXE
aadhi1014
312 × 111.2 mm533 parts6LTAPR-OHL-1.09EKO Miner BM1366-13xx 16-01A
phil31
148.4 × 99.8 mm532 parts6LGPL-3.05NerdOCTAXE-Gamma
powerminingio
200 × 190 mm312 parts6LCERN-OHL-S-2.00STM32
Qaxe
imcmurray
89 × 137 mm192 parts4LNo license0Nerdqaxe+
shufps
89 × 152 mm183 parts4LCERN-OHL-S-2.0244EKO Miner BM1366-13xx 16-01B
phil31
148.4 × 99.8 mm514 parts6LGPL-3.05Nerdqaxe+
imcmurray
89 × 152 mm183 parts4LNo license0AsicsBoard - 16xBM1368 - 01A
phil31
139.8 × 65 mm394 parts6LGPL-3.05AsicsBoard - 16xBM1366 - 01A
phil31
140 × 65 mm368 parts6LGPL-3.05
How designs wire the CSD95472Q5MC
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the CSD95472Q5MC connects to, and the resistors, capacitors and other passives placed on it.
- The ENABLE pin has a capacitor to GND on 8 of 8 designs, most often 2.2 µF (then 1 µF).
- The VDD pin has a capacitor to GND on 8 of 8 designs, most often 2.2 µF (then 100 nF).
- The VSW pin has a series resistor on 8 of 8 designs, most often 1 Ω (then 2 Ω).
- The ENABLE pin has a pull-up to 5V on 7 of 8 designs, most often 1 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| REFINpin 2 | Connected to: VREF 100% | — |
| ENABLEpin 3 | Connected to: Signal 88% |
|
| PGNDpin 4, 13 | Connected to: GND 94% | — |
| VDDpin 5 | Connected to: Signal 100% |
|
| VSWpin 6 | Connected to: Signal 100% |
|
| VINpin 7 | Connected to: 12V 88% |
|
| BOOT_Rpin 8 | Connected to: Signal 100% |
|
| BOOTpin 9 | Connected to: Signal 100% |
|
| FCCMpin 10 | Connected to: CSD95472Q5MC 88%, TPS53647 63% |
|
| TAO/FAULTpin 11 | Connected to: CSD95472Q5MC 88%, TPS53647 63% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nerdqaxe+ by shufps, NerdOCTAXE-Gamma by Patsch91, NerdOCTAXE-Plus by Patsch91 and NerdQX by IxTechCrypto.
The CSD95472Q5MC in open source designs
The gallery holds 12 open source boards using the CSD95472Q5MC from 8 GitHub repositories; a typical one measures about 144.2 × 133.5 mm and carries around 340 components.
100% use four copper layers or more, and 83% carry an open source license.
The most starred is Nerdqaxe+ by shufps.
Parts used alongside the CSD95472Q5MC
Microcontrollers on boards using the CSD95472Q5MC
What boards using the CSD95472Q5MC are built for
CSD95472Q5MC: common questions
Where can I find a CSD95472Q5MC reference design?
Each of the 12 boards on this page is a real design using the CSD95472Q5MC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the CSD95472Q5MC ENABLE pin connected?
The ENABLE pin has a capacitor to GND on 8 of 8 designs, most often 2.2 µF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the CSD95472Q5MC.
How is the CSD95472Q5MC VDD pin connected?
The VDD pin has a capacitor to GND on 8 of 8 designs, most often 2.2 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the CSD95472Q5MC.
What resistor goes on the CSD95472Q5MC VSW pin?
The VSW pin has a series resistor on 8 of 8 designs, most often 1 Ω (then 2 Ω). Counted from the KiCad layouts of 8 open source designs using the CSD95472Q5MC.
What parts are used alongside the CSD95472Q5MC?
The 25MHZ, AP3211, MCP1824T-0802E, TXU0304PW and EMC2302-1 appear in the most repositories here.
Which microcontrollers do boards using the CSD95472Q5MC use?
Most are built on STM32 (1).
How big is a typical board using the CSD95472Q5MC?
The median is 144.2 × 133.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the CSD95472Q5MC?
By GitHub stars, Nerdqaxe+ by shufps, with 244 stars.
Can I simulate one of these boards using the CSD95472Q5MC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.