8 open source boards using the TXU0304PW
Real designs built with the TXU0304PW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NerdOCTAXE-Gamma
Patsch91
200 × 190 mm446 parts6LCERN-OHL-S-2.093NerdOCTAXE-Plus
Patsch91
155.5 × 130 mm290 parts4LCERN-OHL-S-2.033NerdQX
IxTechCrypto
89 × 184 mm217 parts6LCERN-OHL-S-2.027PC-AXE
aadhi1014
312 × 111.2 mm533 parts6LTAPR-OHL-1.09NerdOCTAXE-Gamma
powerminingio
200 × 190 mm312 parts6LCERN-OHL-S-2.00STM32
Qaxe
imcmurray
89 × 137 mm192 parts4LNo license0Nerdqaxe+
shufps
89 × 152 mm183 parts4LCERN-OHL-S-2.0244Nerdqaxe+
imcmurray
89 × 152 mm183 parts4LNo license0
How designs wire the TXU0304PW
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TXU0304PW connects to, and the resistors, capacitors and other passives placed on it.
- The VCCA pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 220 nF).
- The VCCB pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 220 nF).
- The A3 pin is tied to GND on 7 of 7 designs.
- The OE pin is tied to 3.3V on 7 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 3.3V 100% |
|
| A3pin 4 | Connected to: GND 100% | — |
| NCpin 6, 9 | Connected to: Not connected 100% | — |
| GNDpin 7 | Connected to: GND 100% | — |
| OEpin 8 | Connected to: 3.3V 100% | — |
| B3Ypin 11 | Connected to: Not connected 100% | — |
| VCCBpin 14 | Connected to: 1.2V 100% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nerdqaxe+ by shufps, NerdOCTAXE-Gamma by Patsch91, NerdOCTAXE-Plus by Patsch91 and NerdQX by IxTechCrypto.
The TXU0304PW in open source designs
The gallery holds 8 open source boards using the TXU0304PW from 7 GitHub repositories; a typical one measures about 122.3 × 152 mm and carries around 254 components.
100% use four copper layers or more, and 75% carry an open source license.
The most starred is Nerdqaxe+ by shufps.
Parts used alongside the TXU0304PW
Microcontrollers on boards using the TXU0304PW
What boards using the TXU0304PW are built for
TXU0304PW: common questions
Where can I find a TXU0304PW reference design?
Each of the 8 boards on this page is a real design using the TXU0304PW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TXU0304PW VCCA pin?
The VCCA pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 7 open source designs using the TXU0304PW.
What decoupling capacitors do designs use on the TXU0304PW VCCB pin?
The VCCB pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 7 open source designs using the TXU0304PW.
How is the TXU0304PW A3 pin connected?
The A3 pin is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TXU0304PW.
What parts are used alongside the TXU0304PW?
The 25MHZ, AP3211, CSD95472Q5MC, MCP1824T-0802E and EMC2302-1 appear in the most repositories here.
Which microcontrollers do boards using the TXU0304PW use?
Most are built on STM32 (1).
How big is a typical board using the TXU0304PW?
The median is 122.3 × 152 mm, and 0% are two-layer designs.
What is the most popular open source board using the TXU0304PW?
By GitHub stars, Nerdqaxe+ by shufps, with 244 stars.
Can I simulate one of these boards using the TXU0304PW before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.