6 open source boards using the MCP1824T-1202E

Real designs built with the MCP1824T-1202E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the MCP1824T-1202E

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP1824T-1202E connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 220 nF).
  • The EN pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ.
  • The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF.
  • The PG pin is left unconnected on 5 of 5 designs.
VINpin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (7), 220 nF (2)
GNDpin 2Connected to: GND 100%
ENpin 3Connected to: MCP1824T-0802E 100%, T-DISPLAY-S3 60%
  • Resistor to GND on 100% · 10 kΩ (5)
PGpin 4Connected to: Not connected 100%
VOUTpin 5Connected to: 1.2V 100%
  • Decoupling capacitor on 100% · 1 µF (5)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NerdOCTAXE-Gamma by Patsch91, NerdQX by IxTechCrypto, PC-AXE by aadhi1014 and Nerdqaxe+ by imcmurray.

The MCP1824T-1202E in open source designs

The gallery holds 6 open source boards using the MCP1824T-1202E from 5 GitHub repositories; a typical one measures about 144.5 × 168 mm and carries around 265 components.

100% use four copper layers or more, and 67% carry an open source license.

The most starred is NerdOCTAXE-Gamma by Patsch91.

Microcontrollers on boards using the MCP1824T-1202E

What boards using the MCP1824T-1202E are built for

MCP1824T-1202E: common questions

Where can I find a MCP1824T-1202E reference design?

Each of the 6 boards on this page is a real design using the MCP1824T-1202E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MCP1824T-1202E VIN pin?

The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 5 open source designs using the MCP1824T-1202E.

What resistor goes on the MCP1824T-1202E EN pin?

The EN pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the MCP1824T-1202E.

What decoupling capacitors do designs use on the MCP1824T-1202E VOUT pin?

The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the MCP1824T-1202E.

What parts are used alongside the MCP1824T-1202E?

The 25MHZ, AP3211, CSD95472Q5MC, MCP1824T-0802E and TXU0304PW appear in the most repositories here.

Which microcontrollers do boards using the MCP1824T-1202E use?

Most are built on STM32 (1).

How big is a typical board using the MCP1824T-1202E?

The median is 144.5 × 168 mm, and 0% are two-layer designs.

What is the most popular open source board using the MCP1824T-1202E?

By GitHub stars, NerdOCTAXE-Gamma by Patsch91, with 93 stars.

Can I simulate one of these boards using the MCP1824T-1202E before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part