6 open source boards using the TPS53647
Real designs built with the TPS53647, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NerdOCTAXE-Plus
Patsch91
155.5 × 130 mm290 parts4LCERN-OHL-S-2.033NerdQX
IxTechCrypto
89 × 184 mm217 parts6LCERN-OHL-S-2.027NerdOCTAXE-Gamma
powerminingio
200 × 190 mm312 parts6LCERN-OHL-S-2.00STM32
Qaxe
imcmurray
89 × 137 mm192 parts4LNo license0Nerdqaxe+
shufps
89 × 152 mm183 parts4LCERN-OHL-S-2.0244Nerdqaxe+
imcmurray
89 × 152 mm183 parts4LNo license0
How designs wire the TPS53647
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS53647 connects to, and the resistors, capacitors and other passives placed on it.
- The IMON pin has a resistor to GND on 5 of 5 designs, most often 100 kΩ (then 66.5 kΩ).
- The IMON pin has a capacitor to GND on 5 of 5 designs, most often 2.2 nF.
- The VSP pin has a series capacitor on 5 of 5 designs, most often 22 pF.
- The VSP pin has a series resistor on 5 of 5 designs, most often 100 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OCL-Rpin 1 | Connected to: Not connected 100% | — |
| IMONpin 2 | Connected to: Signal 100% |
|
| CSP4pin 6 | Connected to: 3.3V 80% · a signal 20% | — |
| Pin 7 | Connected to: Not connected 100% | — |
| Pin 8 | Connected to: Not connected 100% | — |
| VSPpin 9 | Connected to: Signal 100% |
|
| VSNpin 10 | Connected to: Signal 100% |
|
| COMPpin 11 | Connected to: Signal 100% |
|
| ISUMpin 12 | Connected to: Signal 100% |
|
| VREFpin 13 | Connected to: VREF 100% |
|
| V3R3pin 14 | Connected to: Signal 100% |
|
| V5pin 15 | Connected to: Signal 100% |
|
| VINpin 16 | Connected to: Signal 100% |
|
| GNDpin 17, 20, 22 | Connected to: GND 100% | — |
| VR_RDYpin 18 | Connected to: T-DISPLAY-S3 60%, T-Display-S3 40% |
|
| /VR_HOTpin 19 | Connected to: Not connected 100% | — |
| /RESETpin 21 | Connected to: Signal 100% |
|
| ENABLEpin 23 | Connected to: Signal 100% |
|
| PMB_CLKpin 24 | Connected to: EMC2302-1 100%, TMP1075 100%, T-DISPLAY-S3 60% |
|
| /PMB_ALERTpin 25 | Connected to: Not connected 100% | — |
| PMB_DIOpin 26 | Connected to: EMC2302-1 100%, TMP1075 100%, T-DISPLAY-S3 60% |
|
| /VR_FAULTpin 27 | Connected to: Not connected 100% | — |
| ADDR_TRISEpin 28 | Connected to: Signal 100% |
|
| SLEW-MODEpin 29 | Connected to: Not connected 100% | — |
| O-USRpin 30 | Connected to: Not connected 100% | — |
| VBOOTpin 31 | Connected to: Not connected 100% | — |
| F-IMAXpin 32 | Connected to: Not connected 100% | — |
| Pin 33 | Connected to: Not connected 100% | — |
| Pin 34 | Connected to: Not connected 100% | — |
| PWM4pin 35 | Connected to: Not connected 80% · a signal 20% | — |
| /SKIP-NVMpin 39 | Connected to: CSD95472Q5MC 100% |
|
| TSENpin 40 | Connected to: CSD95472Q5MC 100% |
|
| EPpin 41 | Connected to: GND 100% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nerdqaxe+ by shufps, NerdOCTAXE-Plus by Patsch91, NerdQX by IxTechCrypto and Nerdqaxe+ by imcmurray.
The TPS53647 in open source designs
The gallery holds 6 open source boards using the TPS53647 from 5 GitHub repositories; a typical one measures about 89 × 152 mm and carries around 205 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is Nerdqaxe+ by shufps.
Parts used alongside the TPS53647
Microcontrollers on boards using the TPS53647
What boards using the TPS53647 are built for
TPS53647: common questions
Where can I find a TPS53647 reference design?
Each of the 6 boards on this page is a real design using the TPS53647. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TPS53647 IMON pin?
The IMON pin has a resistor to GND on 5 of 5 designs, most often 100 kΩ (then 66.5 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPS53647.
How is the TPS53647 VSP pin connected?
The VSP pin has a series capacitor on 5 of 5 designs, most often 22 pF. Counted from the KiCad layouts of 5 open source designs using the TPS53647.
How is the TPS53647 VSN pin connected?
The VSN pin has a series capacitor on 5 of 5 designs, most often 22 pF. Counted from the KiCad layouts of 5 open source designs using the TPS53647.
What parts are used alongside the TPS53647?
The 25MHZ, AP3211, CSD95472Q5MC, EMC2302-1 and MCP1824T-0802E appear in the most repositories here.
Which microcontrollers do boards using the TPS53647 use?
Most are built on STM32 (1).
How big is a typical board using the TPS53647?
The median is 89 × 152 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPS53647?
By GitHub stars, Nerdqaxe+ by shufps, with 244 stars.
Can I simulate one of these boards using the TPS53647 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.