7 open source boards using the EMC2302-1
Real designs built with the EMC2302-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NerdOCTAXE-Gamma
Patsch91
200 × 190 mm446 parts6LCERN-OHL-S-2.093NerdOCTAXE-Plus
Patsch91
155.5 × 130 mm290 parts4LCERN-OHL-S-2.033NerdQX
IxTechCrypto
89 × 184 mm217 parts6LCERN-OHL-S-2.027NerdOCTAXE-Gamma
powerminingio
200 × 190 mm312 parts6LCERN-OHL-S-2.00STM32
Qaxe
imcmurray
89 × 137 mm192 parts4LNo license0Nerdqaxe+
shufps
89 × 152 mm183 parts4LCERN-OHL-S-2.0244Nerdqaxe+
imcmurray
89 × 152 mm183 parts4LNo license0
How designs wire the EMC2302-1
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the EMC2302-1 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 220 nF).
- The TACH1 pin has a pull-up to 3.3V on 6 of 6 designs, most often 2.7 kΩ.
- The TACH2 pin has a pull-up to 3.3V on 6 of 6 designs, most often 2.7 kΩ.
- The CLK pin is left unconnected on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SDApin 1 | Connected to: TMP1075 100%, TPS53647 67%, T-DISPLAY-S3 67% |
|
| SCLpin 2 | Connected to: TMP1075 100%, TPS53647 67%, T-DISPLAY-S3 67% |
|
| VDDpin 3 | Connected to: 3.3V 100% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| TACH1pin 6 | Connected to: FAN_4PIN 67%, Fan_4pin 33% |
|
| TACH2pin 8 | Connected to: FAN_4PIN 67%, Fan_4pin 33% |
|
| CLKpin 9 | Connected to: Not connected 100% | — |
| NALERTpin 10 | Connected to: Not connected 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nerdqaxe+ by shufps, NerdOCTAXE-Gamma by Patsch91, NerdOCTAXE-Plus by Patsch91 and NerdQX by IxTechCrypto.
The EMC2302-1 in open source designs
The gallery holds 7 open source boards using the EMC2302-1 from 6 GitHub repositories; a typical one measures about 89 × 152 mm and carries around 217 components.
100% use four copper layers or more, and 71% carry an open source license.
The most starred is Nerdqaxe+ by shufps.
Parts used alongside the EMC2302-1
Microcontrollers on boards using the EMC2302-1
What boards using the EMC2302-1 are built for
EMC2302-1: common questions
Where can I find a EMC2302-1 reference design?
Each of the 7 boards on this page is a real design using the EMC2302-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the EMC2302-1 VDD pin?
The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 6 open source designs using the EMC2302-1.
What pull-up resistor is used on the EMC2302-1 TACH1 pin?
The TACH1 pin has a pull-up to 3.3V on 6 of 6 designs, most often 2.7 kΩ. Counted from the KiCad layouts of 6 open source designs using the EMC2302-1.
What pull-up resistor is used on the EMC2302-1 TACH2 pin?
The TACH2 pin has a pull-up to 3.3V on 6 of 6 designs, most often 2.7 kΩ. Counted from the KiCad layouts of 6 open source designs using the EMC2302-1.
What parts are used alongside the EMC2302-1?
The 25MHZ, AP3211, CSD95472Q5MC, MCP1824T-0802E and T-DISPLAY-S3 appear in the most repositories here.
Which microcontrollers do boards using the EMC2302-1 use?
Most are built on STM32 (1).
How big is a typical board using the EMC2302-1?
The median is 89 × 152 mm, and 0% are two-layer designs.
What is the most popular open source board using the EMC2302-1?
By GitHub stars, Nerdqaxe+ by shufps, with 244 stars.
Can I simulate one of these boards using the EMC2302-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.