11 open source boards using the 27128

Real designs built with the 27128, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the 27128

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 27128 connects to, and the resistors, capacitors and other passives placed on it.

  • The PGM pin is tied to 5V on 6 of 9 designs (not connected on 2).
VPPpin 1Connected to: 5V 67% · not connected 22%
GNDpin 14Connected to: GND 100%
PGMpin 27Connected to: 5V 67% · not connected 22%
VCCpin 28Connected to: 5V 100%

24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MSX-BEER by msx-solis, All Spectrums by alvaroalea, MUTIF09 Single Board Computer by ja1umi and TIM-011B by Board-Folk.

The 27128 in open source designs

The gallery holds 11 open source boards using the 27128 from 9 GitHub repositories; a typical one measures about 101.6 × 99.8 mm and carries around 30 components.

91% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.

The most starred is MSX-BEER by msx-solis.

Microcontrollers on boards using the 27128

27128: common questions

Where can I find a 27128 reference design?

Each of the 11 boards on this page is a real design using the 27128. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 27128 PGM pin connected?

The PGM pin is tied to 5V on 6 of 9 designs (not connected on 2). Counted from the KiCad layouts of 9 open source designs using the 27128.

What parts are used alongside the 27128?

The 74LS04, 74LS00, 74LS32, 62256 and 74LS139 appear in the most repositories here.

Which microcontrollers do boards using the 27128 use?

Most are built on AVR/Arduino (2).

How big is a typical board using the 27128?

The median is 101.6 × 99.8 mm, and 91% are two-layer designs.

What is the most popular open source board using the 27128?

By GitHub stars, MSX-BEER by msx-solis, with 28 stars.

Can I simulate one of these boards using the 27128 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part