10 open source boards using the 6116
Real designs built with the 6116, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Jupiter-II
ricaflops
164.5 × 89.5 mm122 partsMIT4380ColumnCard
btb
155.2 × 78.6 mm47 parts2LApache-2.042Jupiter-II-Expansion
ricaflops
164.5 × 71.8 mm95 parts2LMIT15Chameleon schematics
Seequa-Computer-Preservation
435 × 317.5 mm361 parts2LNo license3Atari-1090XL-80CVC
reifsnyderb
228.6 × 139.7 mm78 parts2LGPL-2.03Peoples permacomputer
genossen
208.3 × 146.1 mm121 parts2LCustom license2Mainboard
btb
414.3 × 266.7 mm155 parts2LNo license0VideoBoard
Cptscorcher
143 × 175 mm51 parts2LGPL-3.00UC2 synertek KTM2
roberto314
100 × 100 mm48 parts2LNo license1GIMIX intelligent 3 port Serial
roberto314
149.9 × 139.7 mm69 parts2LBSD-2-Clause1
How designs wire the 6116
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 6116 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 4 of 10 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 12 | Connected to: GND 100% | — |
| VCCpin 24 | Connected to: 5V 100% |
|
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Jupiter-II by ricaflops, 80ColumnCard by btb, Jupiter-II-Expansion by ricaflops and Atari-1090XL-80CVC by reifsnyderb.
The 6116 in open source designs
The gallery holds 10 open source boards using the 6116 from 10 GitHub repositories; a typical one measures about 164.5 × 139.7 mm and carries around 87 components.
100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Jupiter-II by ricaflops.
Parts used alongside the 6116
What boards using the 6116 are built for
6116: common questions
Where can I find a 6116 reference design?
Each of the 10 boards on this page is a real design using the 6116. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 6116 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 10 designs, most often 100 nF. Counted from the KiCad layouts of 10 open source designs using the 6116.
What parts are used alongside the 6116?
The 74LS166, 2716, 74LS04, 74LS138 and 74LS245 appear in the most repositories here.
How big is a typical board using the 6116?
The median is 164.5 × 139.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the 6116?
By GitHub stars, Jupiter-II by ricaflops, with 43 stars.
Can I simulate one of these boards using the 6116 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.