20 open source boards using the 74LS163
Real designs built with the 74LS163, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
New enet
jayacotton
254 × 134.6 mm36 parts2LMIT21Olivetti M20 L1 schematics
anchorz
457.1 × 308 mm410 parts4LMIT4- schematic only · 278 parts
ARCADE
antongale
278 parts2LNo license3 BitStack-DigiTrainer
RetroStack
320 × 150 mm262 parts2LMIT26809PC
danwerner21
244 × 244 mm155 parts2LNo license2C64NIKI2
ibaldachini
58.4 × 84.8 mm27 parts2LNo license26502PC
danwerner21
244 × 244 mm154 parts2LNo license1OSI-600D-SuperBoard-II
Bambelweeny57
301.5 × 367.4 mm292 parts2LNo license0Dino v0 0 2
robertrico
298.9 × 222.8 mm179 parts4LNo license0Mainboard
btb
414.3 × 266.7 mm155 parts2LNo license0Control
Robert-Riordan-UCD
144.8 × 73.9 mm64 parts2LCERN-OHL-P-2.00AVR/Arduino
CR2021 CPU v2
derpflanz
178.4 × 115.6 mm43 parts2LNo license0- schematic only · 59 parts
Jbecrtctrl
ngdrascal
59 partsMIT0 - schematic only · 34 parts
S100 enet
jayacotton
34 parts2LMIT21 SPI Unit
oberrow
96 × 70 mm29 parts4LMIT1Dice
SeanCarr1
72.1 × 26.4 mm21 parts2LNo license0Vga mem output 01 4l
sim82
80.9 × 100.6 mm61 parts4LMIT1BBC-USBSlim
Board-Folk
84.1 × 54.2 mm44 parts2LNo license4- schematic only · 65 parts
Mc14500
89Mods
65 parts2LMIT3 BBC-PS2
Board-Folk
91.4 × 100.5 mm36 parts2LNo license4
How designs wire the 74LS163
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the 74LS163 connects to, and the resistors, capacitors and other passives placed on it.
- The TC pin is left unconnected on 11 of 15 designs (a signal on 4).
- The CEP pin is tied to 5V on 10 of 15 designs (a signal on 4).
- The CET pin is tied to 5V on 9 of 15 designs (a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CEPpin 7 | Connected to: 5V 67% · a signal 27% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| CETpin 10 | Connected to: 5V 60% · a signal 33% | — |
| TCpin 15 | Connected to: Not connected 73% · a signal 27% | — |
| VCCpin 16 | Connected to: 5V 100% | — |
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include New enet by jayacotton, Olivetti M20 L1 schematics by anchorz, BBC-PS2 by Board-Folk and 6809PC by danwerner21.
The 74LS163 in open source designs
The gallery holds 20 open source boards using the 74LS163 from 18 GitHub repositories; a typical one measures about 211.2 × 125.1 mm and carries around 63 components.
79% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.
The most starred is New enet by jayacotton.
Parts used alongside the 74LS163
Microcontrollers on boards using the 74LS163
What boards using the 74LS163 are built for
74LS163: common questions
Where can I find a 74LS163 reference design?
Each of the 20 boards on this page is a real design using the 74LS163. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS163 TC pin connected?
The TC pin is left unconnected on 11 of 15 designs (a signal on 4). Counted from the KiCad layouts of 15 open source designs using the 74LS163.
How is the 74LS163 CEP pin connected?
The CEP pin is tied to 5V on 10 of 15 designs (a signal on 4). Counted from the KiCad layouts of 15 open source designs using the 74LS163.
How is the 74LS163 CET pin connected?
The CET pin is tied to 5V on 9 of 15 designs (a signal on 5). Counted from the KiCad layouts of 15 open source designs using the 74LS163.
What parts are used alongside the 74LS163?
The 74LS08, 74LS138, 74LS00, 74LS02 and 74LS04 appear in the most repositories here.
Which microcontrollers do boards using the 74LS163 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74LS163?
The median is 211.2 × 125.1 mm, and 79% are two-layer designs.
What is the most popular open source board using the 74LS163?
By GitHub stars, New enet by jayacotton, with 21 stars.
Can I simulate one of these boards using the 74LS163 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.