16 open source boards using the 74LS166
Real designs built with the 74LS166, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
CGA Redux
hkzlab
337.6 × 105.7 mm168 parts4LCC-BY-NC-4.056Jupiter-II
ricaflops
164.5 × 89.5 mm122 partsMIT4380ColumnCard
btb
155.2 × 78.6 mm47 parts2LApache-2.042Apple-II-R0
reifsnyderb
215.5 × 361.2 mm189 parts2LNo license26Microdigital - TK 2000
clemarfolly
236.8 × 169.8 mm195 parts2LNo license17Apollo 7 Squale
jfdelnero
450 × 160 mm219 parts2LNo license6Atari-1090XL-80CVC
reifsnyderb
228.6 × 139.7 mm78 parts2LGPL-2.03RP2040/RP2350
SORD M68 USB Keyboard Converter
tsunozemichan
130.8 × 62.2 mm46 parts2LNo license2Lomax ColorMagic Redux
RichCini
254 × 137.7 mm148 parts4LNo license1WINK MSP-MDC redux
hkzlab
104.1 × 106.7 mm41 parts2LCC-BY-NC-4.00- schematic only · 59 parts
Jbecrtctrl
ngdrascal
59 partsMIT0 TK2000 InterfaceDeDrive
clemarfolly
65.1 × 92.8 mm18 parts2LNo license17Interface01
tsunozemichan
75.5 × 91.8 mm31 parts2LNo license1EVA1 production
roberto314
218 × 125 mm104 parts2LNo license0Proto04 fix 02
tsunozemichan
75.5 × 91.8 mm31 parts2LNo license1UC2 synertek KTM2
roberto314
100 × 100 mm48 parts2LNo license1
How designs wire the 74LS166
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the 74LS166 connects to, and the resistors, capacitors and other passives placed on it.
- The DS pin is tied to GND on 9 of 13 designs (a signal on 3).
- The CE pin is tied to GND on 9 of 13 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DSpin 1 | Connected to: GND 69% · a signal 23% | — |
| CEpin 6 | Connected to: GND 69% · a signal 31% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| CLRpin 9 | Connected to: 74LS166 31% · 5V 31% |
|
| VCCpin 16 | Connected to: 5V 100% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CGA Redux by hkzlab, Jupiter-II by ricaflops, 80ColumnCard by btb and Apple-II-R0 by reifsnyderb.
The 74LS166 in open source designs
The gallery holds 16 open source boards using the 74LS166 from 14 GitHub repositories; a typical one measures about 164.5 × 105.7 mm and carries around 69 components.
86% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is CGA Redux by hkzlab.
Parts used alongside the 74LS166
Microcontrollers on boards using the 74LS166
What boards using the 74LS166 are built for
74LS166: common questions
Where can I find a 74LS166 reference design?
Each of the 16 boards on this page is a real design using the 74LS166. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS166 DS pin connected?
The DS pin is tied to GND on 9 of 13 designs (a signal on 3). Counted from the KiCad layouts of 13 open source designs using the 74LS166.
How is the 74LS166 CE pin connected?
The CE pin is tied to GND on 9 of 13 designs (a signal on 4). Counted from the KiCad layouts of 13 open source designs using the 74LS166.
What parts are used alongside the 74LS166?
The 74LS04, 74LS32, 74LS00, 74LS74 and 74LS86 appear in the most repositories here.
Which microcontrollers do boards using the 74LS166 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the 74LS166?
The median is 164.5 × 105.7 mm, and 86% are two-layer designs.
What is the most popular open source board using the 74LS166?
By GitHub stars, CGA Redux by hkzlab, with 56 stars.
Can I simulate one of these boards using the 74LS166 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.