12 open source boards using the 74F04
Real designs built with the 74F04, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
NuXT
monotech
184.9 × 243.8 mm214 parts4LGPL-3.0120- schematic only · 25 parts
Transputer
nanochess
25 partsBSD-3-Clause92 Sun3 60
54weasels
231.1 × 340.4 mm225 parts4LNo license34Kicad amiga2000
rhaamo
416.3 × 345.8 mm537 parts2LCC0-1.033Amiga 2000R6
iansbremner
416.8 × 346.1 mm553 parts2LNo license19MetaphoricV2
OldWer
204.5 × 138 mm140 parts2LCC0-1.05JC2 v4.1
Emile666
233.7 × 160 mm120 parts2LNo license3Sun3 60 layout2 routing2
54weasels
231.1 × 340.4 mm225 parts4LNo license34Board
CatspersCoffee
254 × 134.6 mm163 partsCustom license0GIMIX DMA Floppy
roberto314
248.9 × 139.7 mm124 parts2LBSD-2-Clause1St225 20427
schlae
136.8 × 199.1 mm212 parts2LNo license38S100 80386 SRAM V6
CatspersCoffee
254 × 134.6 mm98 partsCustom license0
How designs wire the 74F04
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 74F04 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 9 designs, most often 100 nF.
- Pin 4 has a series resistor on 4 of 9 designs, most often 47 Ω (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 2 | Connected to: Signal 100% |
|
| Pin 4 | Connected to: Signal 100% |
|
| Pin 5 | Connected to: Signal 89% |
|
| GNDpin 7 | Connected to: GND 100% | — |
| Pin 8 | Connected to: Signal 89% |
|
| VCCpin 14 | Connected to: 5V 100% |
|
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NuXT by monotech, St225 20427 by schlae, Sun3 60 by 54weasels and Kicad amiga2000 by rhaamo.
The 74F04 in open source designs
The gallery holds 12 open source boards using the 74F04 from 10 GitHub repositories; a typical one measures about 233.7 × 199.1 mm and carries around 188 components.
67% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.
The most starred is NuXT by monotech.
Parts used alongside the 74F04
Microcontrollers on boards using the 74F04
What boards using the 74F04 are built for
74F04: common questions
Where can I find a 74F04 reference design?
Each of the 12 boards on this page is a real design using the 74F04. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74F04 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 9 designs, most often 100 nF. Counted from the KiCad layouts of 9 open source designs using the 74F04.
What resistor goes on the 74F04 pin 4?
Pin 4 has a series resistor on 4 of 9 designs, most often 47 Ω (then 1 kΩ). Counted from the KiCad layouts of 9 open source designs using the 74F04.
What parts are used alongside the 74F04?
The 74F244, 74LS157, 74LS32, 74LS373 and 74LS74 appear in the most repositories here.
Which microcontrollers do boards using the 74F04 use?
Most are built on PIC (1).
How big is a typical board using the 74F04?
The median is 233.7 × 199.1 mm, and 67% are two-layer designs.
What is the most popular open source board using the 74F04?
By GitHub stars, NuXT by monotech, with 120 stars.
Can I simulate one of these boards using the 74F04 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.