7 open source boards using the 74AHCT32
Real designs built with the 74AHCT32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Omega-Mainboard
skiselev
333.4 × 149.9 mm248 parts2LGPL-3.0456Omega-Mainboard
merlinkv
333.4 × 149.9 mm248 parts2LGPL-3.040AVR/Arduino
OtterX
RetroRemake
170.1 × 170.1 mm168 parts4LCERN-OHL-W-2.040Omega-Mainboard
msx-solis
333.4 × 149.9 mm248 parts2LGPL-3.07Omega mainboard1.3eu
msx-solis
333.4 × 149.9 mm252 parts2LGPL-3.05Z80-CPM
skiselev
101.6 × 53.3 mm28 parts2LCERN-OHL-S-2.046502fast3cpu
gfoot
56.5 × 78.7 mm29 parts2LUnlicense7
How designs wire the 74AHCT32
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74AHCT32 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 100% | — |
| VCCpin 14 | Connected to: VCC 100% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, Omega-Mainboard by merlinkv, OtterX by RetroRemake and 6502fast3cpu by gfoot.
The 74AHCT32 in open source designs
The gallery holds 7 open source boards using the 74AHCT32 from 7 GitHub repositories; a typical one measures about 333.4 × 149.9 mm and carries around 248 components.
86% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Omega-Mainboard by skiselev.
Parts used alongside the 74AHCT32
Microcontrollers on boards using the 74AHCT32
What boards using the 74AHCT32 are built for
74AHCT32: common questions
Where can I find a 74AHCT32 reference design?
Each of the 7 boards on this page is a real design using the 74AHCT32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74AHCT32 VCC pin?
The VCC pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the 74AHCT32.
What parts are used alongside the 74AHCT32?
The 74AHCT138, SST39SF040, AS6C4008, 74AHCT125 and 74F245 appear in the most repositories here.
Which microcontrollers do boards using the 74AHCT32 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74AHCT32?
The median is 333.4 × 149.9 mm, and 86% are two-layer designs.
What is the most popular open source board using the 74AHCT32?
By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.
Can I simulate one of these boards using the 74AHCT32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.