12 open source boards using the 74F245
Real designs built with the 74F245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Omega-Mainboard
skiselev
333.4 × 149.9 mm248 parts2LGPL-3.0456PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
NuXT
monotech
184.9 × 243.8 mm214 parts4LGPL-3.0120Omega-Mainboard
merlinkv
333.4 × 149.9 mm248 parts2LGPL-3.040Kicad amiga2000
rhaamo
416.3 × 345.8 mm537 parts2LCC0-1.033Amiga 2000R6
iansbremner
416.8 × 346.1 mm553 parts2LNo license19CompaqportableIII
raymondh2
194 × 170.6 mm123 parts2LNo license17PIC
Nano8088
monotech
110.1 × 101.6 mm75 partsGPL-3.017Omega-Mainboard
msx-solis
333.4 × 149.9 mm248 parts2LGPL-3.07Omega mainboard1.3eu
msx-solis
333.4 × 149.9 mm252 parts2LGPL-3.05PIC
Intel wildcard-88-motherboard
skiselev
116.8 × 165.1 mm75 parts2LCERN-OHL-S-2.01PIC
Micro 8088
Vakon84
152.4 × 101.6 mm71 partsGPL-3.00
How designs wire the 74F245
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the 74F245 connects to, and the resistors, capacitors and other passives placed on it.
- The DB4 pin is tied to GND on 11 of 12 designs.
- The GND pin is tied to VCC on 11 of 12 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DB4pin 10 | Connected to: GND 92% | — |
| GNDpin 20 | Connected to: VCC 92% | — |
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, Micro 8088 by skiselev, NuXT by monotech and Omega-Mainboard by merlinkv.
The 74F245 in open source designs
The gallery holds 12 open source boards using the 74F245 from 12 GitHub repositories; a typical one measures about 263.7 × 149.9 mm and carries around 231 components.
89% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.
The most starred is Omega-Mainboard by skiselev.
Parts used alongside the 74F245
Microcontrollers on boards using the 74F245
What boards using the 74F245 are built for
74F245: common questions
Where can I find a 74F245 reference design?
Each of the 12 boards on this page is a real design using the 74F245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74F245 DB4 pin connected?
The DB4 pin is tied to GND on 11 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the 74F245.
How is the 74F245 GND pin connected?
The GND pin is tied to VCC on 11 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the 74F245.
What parts are used alongside the 74F245?
The AS6C4008, ATF16V8B, 74F244, PIC12F629 and 74AHCT125 appear in the most repositories here.
Which microcontrollers do boards using the 74F245 use?
Most are built on PIC (5).
How big is a typical board using the 74F245?
The median is 263.7 × 149.9 mm, and 89% are two-layer designs.
What is the most popular open source board using the 74F245?
By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.
Can I simulate one of these boards using the 74F245 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.