13 open source boards using the 74F244

Real designs built with the 74F244, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the 74F244

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the 74F244 connects to, and the resistors, capacitors and other passives placed on it.

  • The OEA pin is tied to GND on 8 of 11 designs (a signal on 3).
  • The OEB pin is tied to GND on 8 of 10 designs (a signal on 2).
  • The O3A pin has a series resistor on 6 of 11 designs, most often 47 Ω.
  • The O0A pin has a series resistor on 6 of 10 designs, most often 47 Ω.
OEApin 1Connected to: GND 73% · a signal 27%
GNDpin 10Connected to: GND 73% · a signal 27%
O3Apin 12Connected to: A connector 27%
  • Series resistor on 55% · 47 Ω (6)
O0Apin 18Connected to: A connector 30%, 74F574 20%
  • Series resistor on 60% · 47 Ω (6)
OEBpin 19Connected to: GND 80% · a signal 20%
VCCpin 20Connected to: VCC 80% · a signal 20%
  • Decoupling capacitor on 60% · 100 nF (5)

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Micro 8088 by skiselev, NuXT by monotech, Novasaur by ajhewitt and Kicad amiga2000 by rhaamo.

The 74F244 in open source designs

The gallery holds 13 open source boards using the 74F244 from 12 GitHub repositories; a typical one measures about 152.4 × 101.6 mm and carries around 71 components.

78% are two-layer designs, the rest use four layers or more, and 77% carry an open source license.

The most starred is Micro 8088 by skiselev.

Microcontrollers on boards using the 74F244

What boards using the 74F244 are built for

74F244: common questions

Where can I find a 74F244 reference design?

Each of the 13 boards on this page is a real design using the 74F244. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74F244 OEA pin connected?

The OEA pin is tied to GND on 8 of 11 designs (a signal on 3). Counted from the KiCad layouts of 11 open source designs using the 74F244.

How is the 74F244 OEB pin connected?

The OEB pin is tied to GND on 8 of 10 designs (a signal on 2). Counted from the KiCad layouts of 11 open source designs using the 74F244.

What resistor goes on the 74F244 O3A pin?

The O3A pin has a series resistor on 6 of 11 designs, most often 47 Ω. Counted from the KiCad layouts of 11 open source designs using the 74F244.

What parts are used alongside the 74F244?

The 74F245, 74F04, 74F573, 74LS245 and 8087 appear in the most repositories here.

Which microcontrollers do boards using the 74F244 use?

Most are built on PIC (4).

How big is a typical board using the 74F244?

The median is 152.4 × 101.6 mm, and 78% are two-layer designs.

What is the most popular open source board using the 74F244?

By GitHub stars, Micro 8088 by skiselev, with 414 stars.

Can I simulate one of these boards using the 74F244 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part