19 open source boards using the ATF16V8B
Real designs built with the ATF16V8B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Omega-Mainboard
skiselev
333.4 × 149.9 mm248 parts2LGPL-3.0456PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414Easy z80
skiselev
100 × 100 mm58 parts2LGPL-3.0177PIC
NuXT
monotech
184.9 × 243.8 mm214 parts4LGPL-3.0120Omega-Mainboard
merlinkv
333.4 × 149.9 mm248 parts2LGPL-3.040ISA POST Card v5
ausandavno
108 × 64.1 mm38 parts2LNo license24MacSnap SCSI Reloaded
demik
84 × 88 mm32 parts2LCERN-OHL-P-2.020Micro-XTCF
spark2k06
81.3 × 37.4 mm23 parts2LGPL-3.020Flock v2
skiselev
101.6 × 53.3 mm31 parts2LCERN-OHL-S-2.018PIC
Nano8088
monotech
110.1 × 101.6 mm75 partsGPL-3.017HD6309 computer
trcwm
133 × 82 mm45 parts2LCERN-OHL-1.217Omega-Mainboard
msx-solis
333.4 × 149.9 mm248 parts2LGPL-3.07Omega mainboard1.3eu
msx-solis
333.4 × 149.9 mm252 parts2LGPL-3.05Resound-2-MCA-OPL3
texelec
131.1 × 88.3 mm53 parts2LNo license5- schematic only · 207 parts
DeskPro386 16
breadboardinglabs
207 partsMIT4 PIC
Micro 8088
Vakon84
152.4 × 101.6 mm71 partsGPL-3.00CFT Board 1
alexiosc
233.4 × 280 mm222 parts2LGPL-3.06AVR/Arduino
CFT DFP Board
alexiosc
233.4 × 280 mm186 parts2LGPL-3.06CFT MEM Board
alexiosc
233.4 × 280 mm96 parts2LGPL-3.06
How designs wire the ATF16V8B
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the ATF16V8B connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 13 of 16 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: VCC 100% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, Micro 8088 by skiselev, Easy z80 by skiselev and NuXT by monotech.
The ATF16V8B in open source designs
The gallery holds 19 open source boards using the ATF16V8B from 17 GitHub repositories; a typical one measures about 152.4 × 101.6 mm and carries around 75 components.
93% are two-layer designs, the rest use four layers or more, and 89% carry an open source license.
The most starred is Omega-Mainboard by skiselev.
Parts used alongside the ATF16V8B
Microcontrollers on boards using the ATF16V8B
What boards using the ATF16V8B are built for
ATF16V8B: common questions
Where can I find a ATF16V8B reference design?
Each of the 19 boards on this page is a real design using the ATF16V8B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ATF16V8B VCC pin?
The VCC pin has a decoupling capacitor on 13 of 16 designs, most often 100 nF. Counted from the KiCad layouts of 16 open source designs using the ATF16V8B.
What parts are used alongside the ATF16V8B?
The AS6C4008, 74F245, 74HCT04, SST39SF040 and Z84C00 appear in the most repositories here.
Which microcontrollers do boards using the ATF16V8B use?
Most are built on PIC (4) and AVR/Arduino (1).
How big is a typical board using the ATF16V8B?
The median is 152.4 × 101.6 mm, and 93% are two-layer designs.
What is the most popular open source board using the ATF16V8B?
By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.
Can I simulate one of these boards using the ATF16V8B before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.