11 open source boards using the 8087
Real designs built with the 8087, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
NuXT
monotech
184.9 × 243.8 mm214 parts4LGPL-3.0120- schematic only · 89 parts
Proton Turbo XT
skiselev
89 partsNo license22 PIC
Nano8088
monotech
110.1 × 101.6 mm75 partsGPL-3.017DubaiXTClone
spencer-uk
304.8 × 215.9 mm144 parts4LCERN-OHL-W-2.08Mad5160
madcatse
304.8 × 215.9 mm188 parts4LMIT5Chameleon schematics
Seequa-Computer-Preservation
435 × 317.5 mm361 parts2LNo license38088-MicroATX-Computer
CPTforever
244 × 244 mm184 parts6LNo license0PIC
Micro 8088
Vakon84
152.4 × 101.6 mm71 partsGPL-3.00- schematic only · 164 parts
Xl-7-repro
computerguy096
164 partsGPL-3.00 8087 adapter
abzman
53.3 × 51.4 mm8 parts2LUnlicense4
How designs wire the 8087
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 8087 connects to, and the resistors, capacitors and other passives placed on it.
- The N/C pins is left unconnected on 100% of them.
- The BHE/S7 pin is tied to VCC on 7 of 9 designs (a signal on 2).
- The BUSY pin has a pull-up to 5V on 4 of 9 designs, most often 4.7 kΩ.
- The VCC pin has a decoupling capacitor on 4 of 9 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 20 | Connected to: GND 100% | — |
| N/Cpin 17, 18, 29, 30 | Connected to: Not connected 100% | — |
| BUSYpin 23 | Connected to: 8088 67%, 8088_Max_Mode 22% |
|
| RQ/GT0pin 31 | Connected to: 8088 67%, 8088_Max_Mode 22% |
|
| BHE/S7pin 34 | Connected to: VCC 78% · a signal 22% | — |
| VCCpin 40 | Connected to: VCC 100% |
|
30 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Micro 8088 by skiselev, NuXT by monotech, Nano8088 by monotech and DubaiXTClone by spencer-uk.
The 8087 in open source designs
The gallery holds 11 open source boards using the 8087 from 11 GitHub repositories; a typical one measures about 184.9 × 215.9 mm and carries around 144 components.
67% use four copper layers or more, and 73% carry an open source license.
The most starred is Micro 8088 by skiselev.
Parts used alongside the 8087
Microcontrollers on boards using the 8087
What boards using the 8087 are built for
8087: common questions
Where can I find a 8087 reference design?
Each of the 11 boards on this page is a real design using the 8087. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 8087 N/C pin connected?
The N/C pins is left unconnected on 100% of them. Counted from the KiCad layouts of 9 open source designs using the 8087.
How is the 8087 BHE/S7 pin connected?
The BHE/S7 pin is tied to VCC on 7 of 9 designs (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the 8087.
What pull-up resistor is used on the 8087 BUSY pin?
The BUSY pin has a pull-up to 5V on 4 of 9 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 9 open source designs using the 8087.
What parts are used alongside the 8087?
The 8088, 8288, 74F244, 74F245 and 74F573 appear in the most repositories here.
Which microcontrollers do boards using the 8087 use?
Most are built on PIC (4).
How big is a typical board using the 8087?
The median is 184.9 × 215.9 mm, and 33% are two-layer designs.
What is the most popular open source board using the 8087?
By GitHub stars, Micro 8088 by skiselev, with 414 stars.
Can I simulate one of these boards using the 8087 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.