9 open source boards using the 74HCT240
Real designs built with the 74HCT240, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Hardmpu wt
PickledDog
106.1 × 95.4 mm46 parts2LApache-2.0302FISC
DoctorWkt
214.6 × 123.2 mm73 parts2LGPL-3.010FISC
DoctorWkt
231.3 × 96.5 mm59 parts2LGPL-3.07Exordisk v1
roberto314
160 × 100 mm110 parts2LNo license1SimplifiedEconetInstallKit
kgl2001
85 × 56 mm75 parts4LCC-BY-SA-4.01KIM-1 RAMpager
hkzlab
123.4 × 134.6 mm65 parts2LCC-BY-NC-4.01Registers-StackPointer
DutchMaker
121.9 × 121.9 mm19 parts2LNo license14Exorset Floppy
roberto314
160 × 100 mm85 parts2LNo license1ESP32
Unijoysticle2-c16
ricardoquesada
40.4 × 74.4 mm25 parts2LSHL-2.162
How designs wire the 74HCT240
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74HCT240 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 75% · a signal 25% | — |
| VCCpin 20 | Connected to: 5V 75% · a signal 25% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Unijoysticle2-c16 by ricardoquesada, Hardmpu wt by PickledDog, Registers-StackPointer by DutchMaker and 2FISC by DoctorWkt.
The 74HCT240 in open source designs
The gallery holds 9 open source boards using the 74HCT240 from 8 GitHub repositories; a typical one measures about 123.4 × 100 mm and carries around 65 components.
89% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is Unijoysticle2-c16 by ricardoquesada.
Parts used alongside the 74HCT240
Microcontrollers on boards using the 74HCT240
What boards using the 74HCT240 are built for
74HCT240: common questions
Where can I find a 74HCT240 reference design?
Each of the 9 boards on this page is a real design using the 74HCT240. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT240 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the 74HCT240.
What parts are used alongside the 74HCT240?
The 74HCT574, 74HCT541, 74HCT74, 74HC245 and 74HCT138 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT240 use?
Most are built on AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the 74HCT240?
The median is 123.4 × 100 mm, and 89% are two-layer designs.
What is the most popular open source board using the 74HCT240?
By GitHub stars, Unijoysticle2-c16 by ricardoquesada, with 62 stars.
Can I simulate one of these boards using the 74HCT240 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.