9 open source boards using the 74HCT173
Real designs built with the 74HCT173, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
8bit computer
vascofazza
297.2 × 180.3 mm327 parts2LMIT314Random Jazz Generator
telec16
167.8 × 200.6 mm126 parts2LNo license16TTL 6510 Computer
StefansAI
368.3 × 215.9 mm330 parts2LNo license1177x DFS Controller
kgl2001
38 × 53 mm11 parts2LCC-BY-SA-4.01AVR/Arduino
8bit computer
saktheeswaranswan
297.2 × 180.3 mm327 parts2LMIT0TTL 6510 Computer fab
StefansAI
368.3 × 215.9 mm330 parts2LNo license1Flags
lorenzonotaro
149.4 × 102.8 mm26 parts2LNo license88-bit computer ALU
xrayer2000
99.1 × 87.6 mm46 parts2LCC-BY-NC-4.030Register
lorenzonotaro
67.5 × 70.6 mm10 parts2LNo license8
How designs wire the 74HCT173
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74HCT173 connects to, and the resistors, capacitors and other passives placed on it.
- The OE1 pin is tied to GND on 6 of 7 designs.
- The OE2 pin is tied to GND on 6 of 7 designs.
- The VCC pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 220 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OE1pin 1 | Connected to: GND 86% | — |
| OE2pin 2 | Connected to: GND 86% | — |
| GNDpin 8 | Connected to: GND 86% | — |
| VCCpin 16 | Connected to: VCC 86% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, 8-bit computer ALU by xrayer2000, Random Jazz Generator by telec16 and Flags by lorenzonotaro.
The 74HCT173 in open source designs
The gallery holds 9 open source boards using the 74HCT173 from 7 GitHub repositories; a typical one measures about 167.8 × 180.3 mm and carries around 126 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is 8bit computer by vascofazza.
Parts used alongside the 74HCT173
Microcontrollers on boards using the 74HCT173
What boards using the 74HCT173 are built for
74HCT173: common questions
Where can I find a 74HCT173 reference design?
Each of the 9 boards on this page is a real design using the 74HCT173. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74HCT173 OE1 pin connected?
The OE1 pin is tied to GND on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the 74HCT173.
How is the 74HCT173 OE2 pin connected?
The OE2 pin is tied to GND on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the 74HCT173.
What decoupling capacitors do designs use on the 74HCT173 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 7 open source designs using the 74HCT173.
What parts are used alongside the 74HCT173?
The 74HCT04, 74HCT00, 74HCT02, 74HCT157 and 74HCT245 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT173 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the 74HCT173?
The median is 167.8 × 180.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the 74HCT173?
By GitHub stars, 8bit computer by vascofazza, with 314 stars.
Can I simulate one of these boards using the 74HCT173 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.