7 open source boards using the 74HCT193

Real designs built with the 74HCT193, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the 74HCT193

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HCT193 connects to, and the resistors, capacitors and other passives placed on it.

  • The CO pin is left unconnected on 4 of 5 designs.
  • The BO pin is left unconnected on 4 of 5 designs.
  • The B pin has a series resistor on 2 of 5 designs, most often 10 kΩ.
  • The D pin has a series resistor on 2 of 5 designs, most often 10 kΩ.
Bpin 1Connected to: 74HCT161 60%, 74HCT245 60%, 74HCT157 40% · VCC 20%
  • Series resistor on 40% · 10 kΩ (2)
GNDpin 8Connected to: GND 80% · a signal 20%
Dpin 9Connected to: 74HCT161 60%, 74HCT245 60%, 74HCT157 40% · VCC 20%
  • Series resistor on 40% · 10 kΩ (2)
Cpin 10Connected to: 74HCT161 60%, 74HCT245 60%, 74HCT157 40% · GND 20%
  • Series resistor on 40% · 10 kΩ (2)
LOADpin 11Connected to: 74HCT00 60%, 74HCT193 60% · not connected 20%
  • Capacitor to GND on 40%
COpin 12Connected to: Not connected 80% · a signal 20%
BOpin 13Connected to: Not connected 80% · a signal 20%
Apin 15Connected to: 74HCT161 60%, 74HCT245 60%, 74HCT157 40% · VCC 20%
  • Series resistor on 40% · 10 kΩ (2)
VCCpin 16Connected to: VCC 80% · a signal 20%
  • Decoupling capacitor on 40% · 100 nF (2)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, NQSAP-PCB Program Counter and Stack Pointer by TomNisbet, TTL 6510 Computer by StefansAI and Io card by nojan1.

The 74HCT193 in open source designs

The gallery holds 7 open source boards using the 74HCT193 from 5 GitHub repositories; a typical one measures about 297.2 × 180.3 mm and carries around 327 components.

86% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is 8bit computer by vascofazza.

Microcontrollers on boards using the 74HCT193

What boards using the 74HCT193 are built for

74HCT193: common questions

Where can I find a 74HCT193 reference design?

Each of the 7 boards on this page is a real design using the 74HCT193. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74HCT193 CO pin connected?

The CO pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HCT193.

How is the 74HCT193 BO pin connected?

The BO pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HCT193.

What resistor goes on the 74HCT193 B pin?

The B pin has a series resistor on 2 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the 74HCT193.

What parts are used alongside the 74HCT193?

The 74HCT00, 74HCT08, 74HCT138, 74HCT161 and 74HCT245 appear in the most repositories here.

Which microcontrollers do boards using the 74HCT193 use?

Most are built on AVR/Arduino (2).

How big is a typical board using the 74HCT193?

The median is 297.2 × 180.3 mm, and 86% are two-layer designs.

What is the most popular open source board using the 74HCT193?

By GitHub stars, 8bit computer by vascofazza, with 314 stars.

Can I simulate one of these boards using the 74HCT193 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part