5 open source boards using the 74HCT670

Real designs built with the 74HCT670, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the 74HCT670

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HCT670 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
GNDpin 8Connected to: GND 100%
VCCpin 16Connected to: VCC 100%
  • Decoupling capacitor on 80% · 100 nF (4)

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, Omega-Mainboard by merlinkv, Omega-Mainboard by msx-solis and Omega mainboard1.3eu by msx-solis.

The 74HCT670 in open source designs

The gallery holds 5 open source boards using the 74HCT670 from 5 GitHub repositories; a typical one measures about 333.4 × 149.9 mm and carries around 248 components.

100% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.

The most starred is Omega-Mainboard by skiselev.

74HCT670: common questions

Where can I find a 74HCT670 reference design?

Each of the 5 boards on this page is a real design using the 74HCT670. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HCT670 VCC pin?

The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 74HCT670.

What parts are used alongside the 74HCT670?

The 74AHCT125, 74AHCT138, 74AHCT32, 74F245 and 74F541 appear in the most repositories here.

How big is a typical board using the 74HCT670?

The median is 333.4 × 149.9 mm, and 100% are two-layer designs.

What is the most popular open source board using the 74HCT670?

By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.

Can I simulate one of these boards using the 74HCT670 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part