19 open source boards using the 74LS377

Real designs built with the 74LS377, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the 74LS377

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 74LS377 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 10Connected to: GND 100%
VCCpin 20Connected to: VCC 100%
  • Decoupling capacitor on 30% · 10 nF (2), 100 nF (1)

18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Alu by jes, 8-bit computer General Registers pcb by xrayer2000, Cart by digilogistist and SAP-Plus A and B Registers by TomNisbet.

The 74LS377 in open source designs

The gallery holds 19 open source boards using the 74LS377 from 10 GitHub repositories; a typical one measures about 127 × 101.3 mm and carries around 53 components.

95% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.

The most starred is Instruction by jes.

Microcontrollers on boards using the 74LS377

What boards using the 74LS377 are built for

74LS377: common questions

Where can I find a 74LS377 reference design?

Each of the 19 boards on this page is a real design using the 74LS377. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 74LS377?

The 74LS245, 74LS00, 74LS157, 74LS02 and 74LS04 appear in the most repositories here.

Which microcontrollers do boards using the 74LS377 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the 74LS377?

The median is 127 × 101.3 mm, and 95% are two-layer designs.

What is the most popular open source board using the 74LS377?

By GitHub stars, Instruction by jes, with 301 stars.

Can I simulate one of these boards using the 74LS377 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part