5 open source boards using the 74LS95
Real designs built with the 74LS95, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Main
ceteras
299.2 × 180 mm352 parts2LMIT11Main
ceteras
299.2 × 180 mm434 parts2LMIT5Atari65 130XE C070067
jimbro1000
323.9 × 204 mm327 parts4LNo license4TA8-FDC
felge1966
160 × 100.3 mm60 parts2LGPL-3.032K-BWS
felge1966
170.2 × 94 mm48 parts2LAGPL-3.00
How designs wire the 74LS95
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74LS95 connects to, and the resistors, capacitors and other passives placed on it.
- The P0 pin is tied to GND on 3 of 5 designs.
- The P1 pin is tied to GND on 3 of 5 designs.
- The P2 pin is tied to GND on 3 of 5 designs.
- The P3 pin is tied to GND on 3 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| P0pin 2 | Connected to: GND 60% · 5V 20% · a signal 20% | — |
| P1pin 3 | Connected to: GND 60% · 5V 20% · a signal 20% | — |
| P2pin 4 | Connected to: GND 60% · 5V 20% · a signal 20% | — |
| P3pin 5 | Connected to: GND 60% · 5V 20% · a signal 20% | — |
| GNDpin 7 | Connected to: GND 100% | — |
| VCCpin 14 | Connected to: VCC 100% | — |
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Main by ceteras, Main by ceteras, Atari65 130XE C070067 by jimbro1000 and TA8-FDC by felge1966.
The 74LS95 in open source designs
The gallery holds 5 open source boards using the 74LS95 from 5 GitHub repositories; a typical one measures about 299.2 × 180 mm and carries around 327 components.
80% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is Main by ceteras.
Parts used alongside the 74LS95
What boards using the 74LS95 are built for
74LS95: common questions
Where can I find a 74LS95 reference design?
Each of the 5 boards on this page is a real design using the 74LS95. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS95 P0 pin connected?
The P0 pin is tied to GND on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74LS95.
How is the 74LS95 P1 pin connected?
The P1 pin is tied to GND on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74LS95.
How is the 74LS95 P2 pin connected?
The P2 pin is tied to GND on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74LS95.
What parts are used alongside the 74LS95?
The 74LS08, 74LS74, 74LS04, 74LS193 and 74LS20 appear in the most repositories here.
How big is a typical board using the 74LS95?
The median is 299.2 × 180 mm, and 80% are two-layer designs.
What is the most popular open source board using the 74LS95?
By GitHub stars, Main by ceteras, with 11 stars.
Can I simulate one of these boards using the 74LS95 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.