16 open source boards using the 74LS11

Real designs built with the 74LS11, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the 74LS11

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the 74LS11 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 7 of 14 designs, most often 100 nF.
GNDpin 7Connected to: GND 100%
VCCpin 14Connected to: 5V 100%
  • Decoupling capacitor on 50% · 100 nF (7)

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Retroii by jonthomasson, Microdigital - TK 2000 by clemarfolly, Main by ceteras and Neogeo diag mvs prog by jwestfall69.

The 74LS11 in open source designs

The gallery holds 16 open source boards using the 74LS11 from 16 GitHub repositories; a typical one measures about 174 × 134.3 mm and carries around 105 components.

92% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is Retroii by jonthomasson.

What boards using the 74LS11 are built for

74LS11: common questions

Where can I find a 74LS11 reference design?

Each of the 16 boards on this page is a real design using the 74LS11. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LS11 VCC pin?

The VCC pin has a decoupling capacitor on 7 of 14 designs, most often 100 nF. Counted from the KiCad layouts of 14 open source designs using the 74LS11.

What parts are used alongside the 74LS11?

The 74LS04, 74LS08, 74LS74, 74LS00 and 74LS32 appear in the most repositories here.

How big is a typical board using the 74LS11?

The median is 174 × 134.3 mm, and 92% are two-layer designs.

What is the most popular open source board using the 74LS11?

By GitHub stars, Retroii by jonthomasson, with 33 stars.

Can I simulate one of these boards using the 74LS11 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part