6 open source boards using the 74LVCH2T45DC

Real designs built with the 74LVCH2T45DC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 74LVCH2T45DC

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LVCH2T45DC connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCA pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF).
  • The VCCB pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF).
  • The 2B pin has a series resistor on 4 of 6 designs, most often 100 Ω (then 47 kΩ).
  • The 1B pin has a series resistor on 4 of 6 designs, most often 100 Ω (then 47 kΩ).
VCCApin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 83% · 100 nF (7), 1 µF (3)
GNDpin 4Connected to: GND 100%
2Bpin 6Connected to: Signal 83% · not connected 17%
  • Series resistor on 67% · 100 Ω (4), 47 kΩ (1)
1Bpin 7Connected to: Signal 100%
  • Series resistor on 67% · 100 Ω (4), 47 kΩ (1), 330 Ω (1)
VCCBpin 8Connected to: 5V 83% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (7), 10 µF (3)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include STLinkForm by grumat, Main board by AllenNeuralDynamics, RGB-Mechanical-KEEB- by MohamedAlDeep and Hard wookey jtag by wookey-project.

The 74LVCH2T45DC in open source designs

The gallery holds 6 open source boards using the 74LVCH2T45DC from 6 GitHub repositories; a typical one measures about 80 × 50 mm and carries around 125 components.

83% use four copper layers or more, and 50% carry an open source license.

The most starred is STLinkForm by grumat.

Microcontrollers on boards using the 74LVCH2T45DC

What boards using the 74LVCH2T45DC are built for

74LVCH2T45DC: common questions

Where can I find a 74LVCH2T45DC reference design?

Each of the 6 boards on this page is a real design using the 74LVCH2T45DC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVCH2T45DC VCCA pin?

The VCCA pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the 74LVCH2T45DC.

What decoupling capacitors do designs use on the 74LVCH2T45DC VCCB pin?

The VCCB pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the 74LVCH2T45DC.

What resistor goes on the 74LVCH2T45DC 2B pin?

The 2B pin has a series resistor on 4 of 6 designs, most often 100 Ω (then 47 kΩ). Counted from the KiCad layouts of 6 open source designs using the 74LVCH2T45DC.

What parts are used alongside the 74LVCH2T45DC?

The ADUM4160, RP2040, TPD2EUSB30, W25Q16JVUXIQ and RT6150B-33GQW appear in the most repositories here.

Which microcontrollers do boards using the 74LVCH2T45DC use?

Most are built on RP2040/RP2350 (3) and STM32 (3).

How big is a typical board using the 74LVCH2T45DC?

The median is 80 × 50 mm, and 17% are two-layer designs.

What is the most popular open source board using the 74LVCH2T45DC?

By GitHub stars, STLinkForm by grumat, with 15 stars.

Can I simulate one of these boards using the 74LVCH2T45DC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part