11 open source boards using the AP1117D33
Real designs built with the AP1117D33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Esp hat
al177
73 × 30 mm20 parts2LCC-BY-4.025Decoder Board
obiwanjacobi
99.7 × 99.7 mm215 parts2LCustom license16ESP8266
Esp8266 apa102 bulb
robertfoss
92.4 × 91.4 mm113 parts2LGPL-2.05Nordic nRF
Nrf52 rev a2
xil-se
48.3 × 48.3 mm44 parts2LNo license1NXP
BatteryManagementUnit
EV-Project
0.1 × 0.1 mm68 parts2LNo license0STM32
Simple lqfp64
SL-RU
63.6 × 48.3 mm52 parts2LNo license0ESP8266
8Dimmers
LudovicLemarinel
100 × 100 mm74 parts2LNo license3AVR/Arduino
TeslaController
kavionic
71 × 95 mm93 parts2LGPL-3.02ESP8266
DomoSwitch
chipsi007
39.4 × 39.4 mm41 parts2LMIT0ESP8266
DomoSwitch
NdK73
39.4 × 39.4 mm41 parts2LMIT5ESP8266
LedDimmer ESP8266
LudovicLemarinel
50 × 45 mm19 parts2LNo license3
How designs wire the AP1117D33
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the AP1117D33 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 is tied to GND on 10 of 10 designs.
- Pin 2 is tied to 3.3V on 7 of 10 designs (a signal on 3).
- Pin 3 is tied to 5V on 7 of 10 designs (a signal on 3).
- Pin 2 has a decoupling capacitor on 5 of 10 designs, most often 22 µF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: GND 100% | — |
| Pin 2 | Connected to: 3.3V 70% · a signal 30% |
|
| Pin 3 | Connected to: 5V 70% · a signal 30% |
|
| Pin 4 | Connected to: Not connected 75% · 3.3V 25% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esp hat by al177, Decoder Board by obiwanjacobi, DomoSwitch by NdK73 and Esp8266 apa102 bulb by robertfoss.
The AP1117D33 in open source designs
The gallery holds 11 open source boards using the AP1117D33 from 10 GitHub repositories; a typical one measures about 63.6 × 48.3 mm and carries around 52 components.
100% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.
The most starred is Esp hat by al177.
Microcontrollers on boards using the AP1117D33
What boards using the AP1117D33 are built for
AP1117D33: common questions
Where can I find a AP1117D33 reference design?
Each of the 11 boards on this page is a real design using the AP1117D33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AP1117D33 pin 1 connected?
Pin 1 is tied to GND on 10 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the AP1117D33.
How is the AP1117D33 pin 2 connected?
Pin 2 is tied to 3.3V on 7 of 10 designs (a signal on 3). Counted from the KiCad layouts of 10 open source designs using the AP1117D33.
How is the AP1117D33 pin 3 connected?
Pin 3 is tied to 5V on 7 of 10 designs (a signal on 3). Counted from the KiCad layouts of 10 open source designs using the AP1117D33.
What parts are used alongside the AP1117D33?
The AC/DC, CP2102, ESP-12 and ESP-12E appear in the most repositories here.
Which microcontrollers do boards using the AP1117D33 use?
Most are built on ESP8266 (6), AVR/Arduino (1), Nordic nRF (1) and NXP (1).
How big is a typical board using the AP1117D33?
The median is 63.6 × 48.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the AP1117D33?
By GitHub stars, Esp hat by al177, with 25 stars.
Can I simulate one of these boards using the AP1117D33 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.