9 open source boards using the IS62C256AL
Real designs built with the IS62C256AL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ARIII
na103
114 × 96 mm33 parts2LCC-BY-NC-4.064AVR/Arduino
PhaseLatch
AndersBNielsen
68.8 × 53.6 mm120 parts4LNo license45Claculator Keypad
Robert-Mones
210 × 119 mm195 parts6LNo license5Micro
jurendono
200 × 150 mm175 parts2LNo license0ARIII EPROM
na103
114 × 96 mm33 parts2LCC-BY-NC-4.064Claculator Display
Robert-Mones
174 × 109 mm160 parts4LNo license5V0d-2048-32
smaldragon
90 × 56.8 mm24 parts2LUnlicense2Vic20 FlashCart
dgaunt48
95 × 50 mm31 parts2LNo license0AVR/Arduino
SRAM Programming
PhysicsUofRAUI
109.2 × 57.2 mm20 parts2LMIT0
How designs wire the IS62C256AL
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the IS62C256AL connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 14 | Connected to: GND 100% | — |
| VDDpin 28 | Connected to: 5V 100% |
|
26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ARIII by na103, PhaseLatch by AndersBNielsen, Claculator Display by Robert-Mones and V0d-2048-32 by smaldragon.
The IS62C256AL in open source designs
The gallery holds 9 open source boards using the IS62C256AL from 7 GitHub repositories; a typical one measures about 114 × 96 mm and carries around 33 components.
67% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.
The most starred is ARIII by na103.
Microcontrollers on boards using the IS62C256AL
What boards using the IS62C256AL are built for
IS62C256AL: common questions
Where can I find a IS62C256AL reference design?
Each of the 9 boards on this page is a real design using the IS62C256AL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the IS62C256AL VDD pin?
The VDD pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the IS62C256AL.
What parts are used alongside the IS62C256AL?
The 74HC00, 74HC08 and 74HC154 appear in the most repositories here.
Which microcontrollers do boards using the IS62C256AL use?
Most are built on AVR/Arduino (2).
How big is a typical board using the IS62C256AL?
The median is 114 × 96 mm, and 67% are two-layer designs.
What is the most popular open source board using the IS62C256AL?
By GitHub stars, ARIII by na103, with 64 stars.
Can I simulate one of these boards using the IS62C256AL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.