13 open source boards using the 74HC154
Real designs built with the 74HC154, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Claculator Keypad
Robert-Mones
210 × 119 mm195 parts6LNo license5Supercar larson scanner
hkzlab
63.5 × 43.6 mm41 parts2LCC-BY-NC-4.02AVR/Arduino
BetaBoard
BetaWall
144.8 × 204.5 mm40 parts2LAGPL-3.02Type k interface-02
smrq
438.2 × 152.4 mm393 parts2LNo license1Micro
jurendono
200 × 150 mm175 parts2LNo license0STM32
Keeb4x4
TheRealBluesun
100 × 142.5 mm119 parts4LCERN-OHL-P-2.00Claculator Display
Robert-Mones
174 × 109 mm160 parts4LNo license5NXP
MusicBrain SPI-busboard v2
MarkWestbroek
200 × 115 mm88 parts2LMIT0Team tap
abzman
134.6 × 58.4 mm38 parts2LUnlicense3GSwitch LOOP8 - 8x true bypass relaisloop
MarkWestbroek
200 × 58 mm71 parts2LMIT0Control unit
Trilobyte-CPU
83.3 × 43.2 mm41 parts4LNo license2GSwitch LOOP8-SH - 8x relaisloop compact (schroefklemmen)
MarkWestbroek
150 × 44 mm69 parts2LMIT0ESP32
GSwitch BRAIN - ESP32-S3 hoofdbord
MarkWestbroek
100 × 70 mm65 parts2LMIT0
How designs wire the 74HC154
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 74HC154 connects to, and the resistors, capacitors and other passives placed on it.
- The E1 pin is tied to GND on 6 of 8 designs (a signal on 2).
- The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 12 | Connected to: GND 100% | — |
| E1pin 19 | Connected to: GND 75% · a signal 25% | — |
| VCCpin 24 | Connected to: 5V 100% |
|
21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Claculator Display by Robert-Mones, Team tap by abzman, BetaBoard by BetaWall and Supercar larson scanner by hkzlab.
The 74HC154 in open source designs
The gallery holds 13 open source boards using the 74HC154 from 9 GitHub repositories; a typical one measures about 150 × 109 mm and carries around 71 components.
69% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.
The most starred is Claculator Keypad by Robert-Mones.
Parts used alongside the 74HC154
Microcontrollers on boards using the 74HC154
What boards using the 74HC154 are built for
74HC154: common questions
Where can I find a 74HC154 reference design?
Each of the 13 boards on this page is a real design using the 74HC154. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74HC154 E1 pin connected?
The E1 pin is tied to GND on 6 of 8 designs (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the 74HC154.
What decoupling capacitors do designs use on the 74HC154 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the 74HC154.
What parts are used alongside the 74HC154?
The 74HC04, 74HC08, 74HC86, 74HC00 and 74HC02 appear in the most repositories here.
Which microcontrollers do boards using the 74HC154 use?
Most are built on AVR/Arduino (1), ESP32 (1), NXP (1) and STM32 (1).
How big is a typical board using the 74HC154?
The median is 150 × 109 mm, and 69% are two-layer designs.
What is the most popular open source board using the 74HC154?
By GitHub stars, Claculator Keypad by Robert-Mones, with 5 stars.
Can I simulate one of these boards using the 74HC154 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.