12 open source boards using the KA78M05_TO252
Real designs built with the KA78M05_TO252, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OCXO
F6ITU
50 × 50 mm16 parts2LNo license8Cardshark
slobworks
237 × 70.5 mm75 parts4LMIT2AVR/Arduino
Mentor
F6ITU
50 × 100 mm48 parts2LNo license2- schematic only · 69 parts
Eurorack-3310-ADSR
DIYSynthMNL
69 partsNo license2 Carte robo pince
MatisTeo
62.7 × 50.7 mm23 parts2LNo license1AVR/Arduino
Desligador
carloslcor
76 × 62 mm109 parts2LNo license0AVR/Arduino
Main board
ARTS-Laboratory
40.6 × 82.6 mm32 parts2LCC-BY-SA-4.00Big-7segment display arduino
Ktheara
72.9 × 88.1 mm32 parts2LMIT0AVR/Arduino
Dual mentor
F6ITU
100 × 100 mm48 parts2LNo license2LV Sensor
Gregification
186.7 × 123.9 mm68 parts2LMIT5PIC
BackplanePCB solder.kicad pcb RIGHT
jeremysiebers
470 × 59 mm74 parts2LNo license0PIC
BackplanePCB solder.kicad pcb LEFT
jeremysiebers
280 × 59 mm68 parts2LNo license0
How designs wire the KA78M05_TO252
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the KA78M05_TO252 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a capacitor to GND on 6 of 9 designs, most often 100 nF (then 3.3 e-13F).
- The VO pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIpin 1 | Connected to: Signal 56% · 12V 44% |
|
| GNDpin 2 | Connected to: GND 89% | — |
| VOpin 3 | Connected to: 5V 78% · a signal 22% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OCXO by F6ITU, LV Sensor by Gregification, Mentor by F6ITU and Cardshark by slobworks.
The KA78M05_TO252 in open source designs
The gallery holds 12 open source boards using the KA78M05_TO252 from 10 GitHub repositories; a typical one measures about 76 × 70.4 mm and carries around 58 components.
91% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is OCXO by F6ITU.
Microcontrollers on boards using the KA78M05_TO252
What boards using the KA78M05_TO252 are built for
KA78M05_TO252: common questions
Where can I find a KA78M05_TO252 reference design?
Each of the 12 boards on this page is a real design using the KA78M05_TO252. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the KA78M05_TO252 VI pin connected?
The VI pin has a capacitor to GND on 6 of 9 designs, most often 100 nF (then 3.3 e-13F). Counted from the KiCad layouts of 9 open source designs using the KA78M05_TO252.
What decoupling capacitors do designs use on the KA78M05_TO252 VO pin?
The VO pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the KA78M05_TO252.
Which microcontrollers do boards using the KA78M05_TO252 use?
Most are built on AVR/Arduino (4) and PIC (2).
How big is a typical board using the KA78M05_TO252?
The median is 76 × 70.4 mm, and 91% are two-layer designs.
What is the most popular open source board using the KA78M05_TO252?
By GitHub stars, OCXO by F6ITU, with 8 stars.
Can I simulate one of these boards using the KA78M05_TO252 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.