2 open source boards using the LGS6302B5

Real designs built with the LGS6302B5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The LGS6302B5 in open source designs

The gallery holds 2 open source boards using the LGS6302B5 from 2 GitHub repositories; a typical one measures about 90 × 80 mm and carries around 356 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Glider by Modos-Labs.

Microcontrollers on boards using the LGS6302B5

What boards using the LGS6302B5 are built for

LGS6302B5: common questions

Where can I find a LGS6302B5 reference design?

Each of the 2 boards on this page is a real design using the LGS6302B5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LGS6302B5?

The ADV7611, CBTL02043A, FUSB302BMPX, INA3221 and JW3651QFNE appear in the most repositories here.

Which microcontrollers do boards using the LGS6302B5 use?

Most are built on STM32 (2).

How big is a typical board using the LGS6302B5?

The median is 90 × 80 mm, and 0% are two-layer designs.

What is the most popular open source board using the LGS6302B5?

By GitHub stars, Glider by Modos-Labs, with 2,676 stars.

Can I simulate one of these boards using the LGS6302B5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part