10 open source boards using the LM2842X

Real designs built with the LM2842X, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

The LM2842X in open source designs

The gallery holds 10 open source boards using the LM2842X from 4 GitHub repositories; a typical one measures about 31.5 × 60 mm and carries around 28 components.

90% are two-layer designs, the rest use four layers or more, and 10% carry an open source license.

The most starred is BluePhil by pms67.

Microcontrollers on boards using the LM2842X

LM2842X: common questions

Where can I find a LM2842X reference design?

Each of the 10 boards on this page is a real design using the LM2842X. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LM2842X?

The USBLC6-2SC6, MAX-M8Q, MPU-6050, SPL06-007 and STM32F405RGT6 appear in the most repositories here.

Which microcontrollers do boards using the LM2842X use?

Most are built on ESP32 (7) and STM32 (3).

How big is a typical board using the LM2842X?

The median is 31.5 × 60 mm, and 90% are two-layer designs.

What is the most popular open source board using the LM2842X?

By GitHub stars, BluePhil by pms67, with 53 stars.

Can I simulate one of these boards using the LM2842X before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part