3 open source boards using the SPL06-007
Real designs built with the SPL06-007, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
BluePhil
pms67
50 × 66 mm99 parts2LMIT53STM32
Aero-Zero
ChladpavPy
65 × 40.8 mm92 parts4LNo license0STM32
BluePhil
juan-LARRAYA
50 × 66 mm99 parts2LNo license0
The SPL06-007 in open source designs
The gallery holds 3 open source boards using the SPL06-007 from 3 GitHub repositories; a typical one measures about 50 × 66 mm and carries around 99 components.
67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is BluePhil by pms67.
Parts used alongside the SPL06-007
Microcontrollers on boards using the SPL06-007
What boards using the SPL06-007 are built for
SPL06-007: common questions
Where can I find a SPL06-007 reference design?
Each of the 3 boards on this page is a real design using the SPL06-007. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SPL06-007?
The USBLC6-2SC6, LM2842X, MAX-M8Q, MPU-6050 and STM32F405RGT6 appear in the most repositories here.
Which microcontrollers do boards using the SPL06-007 use?
Most are built on STM32 (3).
How big is a typical board using the SPL06-007?
The median is 50 × 66 mm, and 67% are two-layer designs.
What is the most popular open source board using the SPL06-007?
By GitHub stars, BluePhil by pms67, with 53 stars.
Can I simulate one of these boards using the SPL06-007 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.