18 open source boards using the LM2902

Real designs built with the LM2902, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the LM2902

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the LM2902 connects to, and the resistors, capacitors and other passives placed on it.

  • The - pins have a series resistor on 9 of 11 designs, most often 100 kΩ (then 10 kΩ).
  • The + pins have a series resistor on 9 of 11 designs, most often 100 kΩ (then 10 kΩ).
  • The + pins have a resistor to GND on 8 of 11 designs, most often 10 kΩ (then 33 kΩ).
  • The V+ pin has a decoupling capacitor on 7 of 11 designs, most often 100 nF (then 10 µF).
Pin 1Connected to: Signal 100%
  • Series resistor on 45% · 100 kΩ (2), 100 Ω (1), 10 kΩ (1)
-pin 2, 6, 9, 13Connected to: Signal 86%
  • Series resistor on 82% · 100 kΩ (11), 10 kΩ (8), 1 kΩ (6)
  • Series capacitor on 36% · 33 pF (4), 100 nF (1), 33 nF (1)
+pin 3, 5, 10, 12Connected to: Signal 77%
  • Series resistor on 82% · 100 kΩ (16), 10 kΩ (5), 22 kΩ (5)
  • Resistor to GND on 73% · 10 kΩ (4), 33 kΩ (4), 36 kΩ (3)
  • Capacitor to GND on 36% · 100 nF (3)
V+pin 4Connected to: 5V 91%
  • Decoupling capacitor on 64% · 100 nF (4), 10 µF (1)
Pin 7Connected to: Signal 100%
  • Series resistor on 55% · 100 kΩ (2), 100 Ω (1), 470 Ω (1)
Pin 8Connected to: Signal 82% · VBAT_READ 18%
  • Series resistor on 55% · 100 kΩ (2), 10 kΩ (1), 470 Ω (1)
V-pin 11Connected to: GND 73% · -5V 18%
Pin 14Connected to: Signal 73% · not connected 27%
  • Series resistor on 45% · 10 kΩ (1), 100 kΩ (1), 470 Ω (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DAC ADC PWM IO by DanielMartensson, NeOSensorV5 by fthiebolt, WALL-E by akrivka and DelSol Mixer by dzavalishin.

The LM2902 in open source designs

The gallery holds 18 open source boards using the LM2902 from 12 GitHub repositories; a typical one measures about 110 × 100 mm and carries around 125 components.

82% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.

The most starred is DAC ADC PWM IO by DanielMartensson.

Parts used alongside the LM2902

Microcontrollers on boards using the LM2902

LM2902: common questions

Where can I find a LM2902 reference design?

Each of the 18 boards on this page is a real design using the LM2902. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the LM2902 - pin?

The - pins have a series resistor on 9 of 11 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 11 open source designs using the LM2902.

What resistor goes on the LM2902 + pin?

The + pins have a series resistor on 9 of 11 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 11 open source designs using the LM2902.

What decoupling capacitors do designs use on the LM2902 V+ pin?

The V+ pin has a decoupling capacitor on 7 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the LM2902.

What parts are used alongside the LM2902?

The LM2904, LM2903 and SN65HVD232 appear in the most repositories here.

Which microcontrollers do boards using the LM2902 use?

Most are built on STM32 (6), ESP32 (3), Microchip SAM (1) and TI MSP430/CC (1).

How big is a typical board using the LM2902?

The median is 110 × 100 mm, and 82% are two-layer designs.

What is the most popular open source board using the LM2902?

By GitHub stars, DAC ADC PWM IO by DanielMartensson, with 180 stars.

Can I simulate one of these boards using the LM2902 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part