9 open source boards using the MIC5219-3.3YM5-TR
Real designs built with the MIC5219-3.3YM5-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Mitayi-Pico-D1
CIRCUITSTATE
51 × 21 mm51 parts2LMIT36RP2040/RP2350
KiExport
vishnumaiea
51 × 21 mm51 parts2LNo license12STM32
Gem solder
arlenko
34 × 96 mm96 parts2LCERN-OHL-S-2.06RP2040/RP2350
Opm inline
opme
58 × 40 mm100 parts4LNo license0AVR/Arduino
ECE411-PracticumProject-G11
ECE411-Practicum-Group11
140 × 64.8 mm63 parts2LCC0-1.00RP2040/RP2350
Mitayi-Pico-D1
oaslananka
51 × 21 mm51 parts2LCustom license0ESP32
Pokodoro
justinjchae
55 × 85 mm48 parts4LNo license0ESP32
Pokodoro2
justinjchae
55 × 85 mm48 parts4LNo license0RP2040/RP2350
Mitayi-Pico-D1
palginpav
51 × 21 mm51 parts2LApache-2.01
How designs wire the MIC5219-3.3YM5-TR
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the MIC5219-3.3YM5-TR connects to, and the resistors, capacitors and other passives placed on it.
- The BP pin has a capacitor to GND on 7 of 8 designs, most often 470 pF (then 1 nF).
- The OUT pin is tied to 3.3V on 7 of 8 designs.
- The IN pin is tied to VSYS on 5 of 8 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: VSYS 63% · a signal 38% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| BPpin 4 | Connected to: Signal 88% |
|
| OUTpin 5 | Connected to: 3.3V 88% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mitayi-Pico-D1 by CIRCUITSTATE, KiExport by vishnumaiea, Gem solder by arlenko and Mitayi-Pico-D1 by palginpav.
The MIC5219-3.3YM5-TR in open source designs
The gallery holds 9 open source boards using the MIC5219-3.3YM5-TR from 8 GitHub repositories; a typical one measures about 51 × 40 mm and carries around 51 components.
67% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is Mitayi-Pico-D1 by CIRCUITSTATE.
Parts used alongside the MIC5219-3.3YM5-TR
Microcontrollers on boards using the MIC5219-3.3YM5-TR
What boards using the MIC5219-3.3YM5-TR are built for
MIC5219-3.3YM5-TR: common questions
Where can I find a MIC5219-3.3YM5-TR reference design?
Each of the 9 boards on this page is a real design using the MIC5219-3.3YM5-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MIC5219-3.3YM5-TR BP pin connected?
The BP pin has a capacitor to GND on 7 of 8 designs, most often 470 pF (then 1 nF). Counted from the KiCad layouts of 8 open source designs using the MIC5219-3.3YM5-TR.
How is the MIC5219-3.3YM5-TR OUT pin connected?
The OUT pin is tied to 3.3V on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the MIC5219-3.3YM5-TR.
How is the MIC5219-3.3YM5-TR IN pin connected?
The IN pin is tied to VSYS on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the MIC5219-3.3YM5-TR.
Which microcontrollers do boards using the MIC5219-3.3YM5-TR use?
Most are built on RP2040/RP2350 (5), ESP32 (2), AVR/Arduino (1) and STM32 (1).
How big is a typical board using the MIC5219-3.3YM5-TR?
The median is 51 × 40 mm, and 67% are two-layer designs.
What is the most popular open source board using the MIC5219-3.3YM5-TR?
By GitHub stars, Mitayi-Pico-D1 by CIRCUITSTATE, with 36 stars.
Can I simulate one of these boards using the MIC5219-3.3YM5-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.