11 open source boards using the TPS7A4501DCQT
Real designs built with the TPS7A4501DCQT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Mainboard
pycubed
90.2 × 95.9 mm196 parts2LNo license97Microchip SAM
Mainboard
alxklso
90.2 × 95.9 mm196 parts4LMIT1Microchip SAM
Mainboard
stanford-ssi
90.2 × 95.9 mm248 parts2LNo license0- schematic only · 369 partsRaspberry Pi
PiCubed
NeilKhera
369 parts2LNo license0 RP2040/RP2350
PiCubed
stanford-ssi
90.2 × 95.9 mm176 parts4LNo license13Distribution
aati106
82.1 × 78.3 mm74 parts2LNo license2RP2040/RP2350
Mainboard
pete4radio
90.2 × 95.9 mm175 parts4LNo license0PiCoral
polygnomial
90.2 × 95.9 mm92 parts6LNo license2Sqrt of g
polygnomial
90.2 × 95.9 mm62 parts4LNo license2RP2040/RP2350
Raspberry Pi Interface Board
stanford-ssi
56 × 65 mm38 parts4LNo license13Raspberry Pi Interface Board
pete4radio
56 × 65 mm38 parts4LNo license0
How designs wire the TPS7A4501DCQT
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TPS7A4501DCQT connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin has a capacitor to GND on 7 of 7 designs, most often 10 µF (then 100 nF).
- The OUT pin has a series resistor on 7 of 7 designs, most often 10 kΩ.
- The SENSE/ADJ pin has a resistor to GND on 7 of 7 designs, most often 3.3 kΩ.
- The SENSE/ADJ pin has a series resistor on 7 of 7 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 2 | Connected to: VBATT 86% | — |
| GND_1pin 3 | Connected to: GND 100% | — |
| OUTpin 4 | Connected to: KF50BD-TR 29% |
|
| SENSE/ADJpin 5 | Connected to: Signal 100% |
|
| GND_2pin 6 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mainboard by pycubed, PiCubed by stanford-ssi, Distribution PCB by aati106 and PiCoral by polygnomial.
The TPS7A4501DCQT in open source designs
The gallery holds 11 open source boards using the TPS7A4501DCQT from 8 GitHub repositories; a typical one measures about 90.2 × 95.9 mm and carries around 175 components.
64% use four copper layers or more, and 9% carry an open source license.
The most starred is Mainboard by pycubed.
Parts used alongside the TPS7A4501DCQT
Microcontrollers on boards using the TPS7A4501DCQT
What boards using the TPS7A4501DCQT are built for
TPS7A4501DCQT: common questions
Where can I find a TPS7A4501DCQT reference design?
Each of the 11 boards on this page is a real design using the TPS7A4501DCQT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS7A4501DCQT OUT pin connected?
The OUT pin has a capacitor to GND on 7 of 7 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the TPS7A4501DCQT.
What resistor goes on the TPS7A4501DCQT SENSE/ADJ pin?
The SENSE/ADJ pin has a resistor to GND on 7 of 7 designs, most often 3.3 kΩ. Counted from the KiCad layouts of 7 open source designs using the TPS7A4501DCQT.
How is the TPS7A4501DCQT IN pin connected?
The IN pin is tied to VBATT on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TPS7A4501DCQT.
What parts are used alongside the TPS7A4501DCQT?
The RFM98PW, ADM1176-1ARMZ-R7, BQ25883RGER, PE014006 TE and TPS54226PWPR appear in the most repositories here.
Which microcontrollers do boards using the TPS7A4501DCQT use?
Most are built on RP2040/RP2350 (3), Microchip SAM (3) and Raspberry Pi (1).
How big is a typical board using the TPS7A4501DCQT?
The median is 90.2 × 95.9 mm, and 36% are two-layer designs.
What is the most popular open source board using the TPS7A4501DCQT?
By GitHub stars, Mainboard by pycubed, with 97 stars.
Can I simulate one of these boards using the TPS7A4501DCQT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.