9 open source boards using the MAX706RESA
Real designs built with the MAX706RESA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Mainboard
pycubed
90.2 × 95.9 mm196 parts2LNo license97Microchip SAM
Mainboard before drastic
Sierra-Lobo
90.2 × 101.1 mm353 parts6LCC-BY-SA-4.01Microchip SAM
Mainboard
alxklso
90.2 × 95.9 mm196 parts4LMIT1STM32
PowerDistribution
UChicago-Space-Program
90.2 × 96 mm183 parts4LNo license1Microchip SAM
Mainboard
stanford-ssi
90.2 × 95.9 mm248 parts2LNo license0- schematic only · 138 parts
PCB1 PANEL IN SPV1040 BUCK5 BUCK33 OCPC
team-anant
138 parts2LMIT0 Batteryboard
pycubed
95.9 × 90.2 mm28 parts2LNo license97Microchip SAM
Mainboard
Sierra-Lobo
90.2 × 101.1 mm312 parts6LCC-BY-SA-4.01RP2040/RP2350
FC Board v3
proveskit
100 × 100 mm73 parts4LCERN-OHL-W-2.06
How designs wire the MAX706RESA
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MAX706RESA connects to, and the resistors, capacitors and other passives placed on it.
- The RESET pin has a series resistor on 5 of 5 designs, most often 10 kΩ.
- The MR pin is left unconnected on 5 of 6 designs.
- The PFI pin is tied to GND on 5 of 6 designs.
- The PFO pin is left unconnected on 5 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| MRpin 1 | Connected to: Not connected 83% · a signal 17% | — |
| VCCpin 2 | Connected to: 3.3V 67% · a signal 33% | — |
| GNDpin 3 | Connected to: GND 83% · a signal 17% | — |
| PFIpin 4 | Connected to: GND 83% · a signal 17% | — |
| PFOpin 5 | Connected to: Not connected 83% · VDD 17% | — |
| WDIpin 6 | Connected to: The microcontroller 83% |
|
| RESETpin 7 | Connected to: Signal 100% |
|
| WDOpin 8 | Connected to: Not connected 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Batteryboard by pycubed, FC Board v3 by proveskit, Mainboard by alxklso and Mainboard by Sierra-Lobo.
The MAX706RESA in open source designs
The gallery holds 9 open source boards using the MAX706RESA from 7 GitHub repositories; a typical one measures about 90.2 × 95.9 mm and carries around 196 components.
56% use four copper layers or more, and 56% carry an open source license.
The most starred is Mainboard by pycubed.
Parts used alongside the MAX706RESA
Microcontrollers on boards using the MAX706RESA
What boards using the MAX706RESA are built for
MAX706RESA: common questions
Where can I find a MAX706RESA reference design?
Each of the 9 boards on this page is a real design using the MAX706RESA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the MAX706RESA RESET pin?
The RESET pin has a series resistor on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the MAX706RESA.
How is the MAX706RESA MR pin connected?
The MR pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the MAX706RESA.
How is the MAX706RESA PFI pin connected?
The PFI pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the MAX706RESA.
What parts are used alongside the MAX706RESA?
The RFM98PW, ADM1176-1ARMZ-R7, BQ25883RGER, ATSAMD51J19A-AU and BMX160 appear in the most repositories here.
Which microcontrollers do boards using the MAX706RESA use?
Most are built on Microchip SAM (5), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the MAX706RESA?
The median is 90.2 × 95.9 mm, and 44% are two-layer designs.
What is the most popular open source board using the MAX706RESA?
By GitHub stars, Mainboard by pycubed, with 97 stars.
Can I simulate one of these boards using the MAX706RESA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.