21 open source boards using the SN74LVC1G74DCUR

Real designs built with the SN74LVC1G74DCUR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

21 boardsClear filters|Most starred

How designs wire the SN74LVC1G74DCUR

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the SN74LVC1G74DCUR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC_8 pin has a decoupling capacitor on 8 of 12 designs, most often 100 nF (then 1 µF).
  • The Q_3 pin is left unconnected on 9 of 12 designs (a signal on 3).
  • The Q_5 pin has a series resistor on 5 of 12 designs, most often 10 kΩ (then 100 Ω).
  • The PRE_7 pin has a capacitor to GND on 5 of 12 designs, most often 100 nF (then 10 nF).
CLK_1pin 1Connected to: Signal 92%
  • Series resistor on 33% · 10 kΩ (2), 0 Ω (1)
Q_3pin 3Connected to: Not connected 75% · a signal 25%
GND_4pin 4Connected to: GND 75% · a signal 25%
Q_5pin 5Connected to: Signal 100%
  • Series resistor on 42% · 10 kΩ (4), 100 Ω (1), 0 Ω (1)
CLR_6pin 6Connected to: Signal 92%
  • Capacitor to GND on 33% · 1 µF (3), 100 nF (2)
PRE_7pin 7Connected to: Signal 58% · 3.3V 42%
  • Capacitor to GND on 42% · 100 nF (8), 10 nF (1)
VCC_8pin 8Connected to: 3.3V 67% · a signal 33%
  • Decoupling capacitor on 67% · 100 nF (11), 1 µF (2), 2.2 µF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BB3plus mainboard by eez-open, Leshy2 LESHY2-UI-R2 R2 exact placement by anton-vinogradov, Led button by GeniePod and Shack Relay Matrix rev C: controller board by PE1RGU.

The SN74LVC1G74DCUR in open source designs

The gallery holds 21 open source boards using the SN74LVC1G74DCUR from 13 GitHub repositories; a typical one measures about 115 × 92.5 mm and carries around 155 components.

71% use four copper layers or more, and 52% carry an open source license.

The most starred is BB3plus mainboard by eez-open.

Microcontrollers on boards using the SN74LVC1G74DCUR

SN74LVC1G74DCUR: common questions

Where can I find a SN74LVC1G74DCUR reference design?

Each of the 21 boards on this page is a real design using the SN74LVC1G74DCUR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74LVC1G74DCUR VCC_8 pin?

The VCC_8 pin has a decoupling capacitor on 8 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the SN74LVC1G74DCUR.

How is the SN74LVC1G74DCUR Q_3 pin connected?

The Q_3 pin is left unconnected on 9 of 12 designs (a signal on 3). Counted from the KiCad layouts of 12 open source designs using the SN74LVC1G74DCUR.

What resistor goes on the SN74LVC1G74DCUR Q_5 pin?

The Q_5 pin has a series resistor on 5 of 12 designs, most often 10 kΩ (then 100 Ω). Counted from the KiCad layouts of 12 open source designs using the SN74LVC1G74DCUR.

What parts are used alongside the SN74LVC1G74DCUR?

The SN74LVC1G17DBVR, SN74LVC1G08DBVR, SN74LVC1G04DBVR, SN74LVC1G32DBVR and BQ25798RQMR appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC1G74DCUR use?

Most are built on ESP32 (8) and STM32 (3).

How big is a typical board using the SN74LVC1G74DCUR?

The median is 115 × 92.5 mm, and 29% are two-layer designs.

What is the most popular open source board using the SN74LVC1G74DCUR?

By GitHub stars, BB3plus mainboard by eez-open, with 12 stars.

Can I simulate one of these boards using the SN74LVC1G74DCUR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part