5 open source boards using the TCR2EF

Real designs built with the TCR2EF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TCR2EF

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TCR2EF connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
  • Pin 5 has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 22 µF).
  • Pin 2 is tied to GND on 5 of 5 designs.
  • Pin 4 is left unconnected on 5 of 5 designs.
Pin 1Connected to: VCC 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (5)
Pin 2Connected to: GND 100%
Pin 3Connected to: 74LVC1G14 80% · 3.3V 20%
  • Capacitor to GND on 80% · 100 nF (4)
Pin 4Connected to: Not connected 100%
Pin 5Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (4), 22 µF (1)
  • Crystal on 80%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Neapolitan by Josephrp, Gem hardware by ajakef, Neapolitan by greearb and Neapolitan by JensLiu.

The TCR2EF in open source designs

The gallery holds 5 open source boards using the TCR2EF from 5 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 290 components.

80% carry an open source license.

The most starred is Neapolitan by Josephrp.

What boards using the TCR2EF are built for

TCR2EF: common questions

Where can I find a TCR2EF reference design?

Each of the 5 boards on this page is a real design using the TCR2EF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TCR2EF pin 1?

Pin 1 has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TCR2EF.

How is the TCR2EF pin 5 connected?

Pin 5 has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the TCR2EF.

How is the TCR2EF pin 2 connected?

Pin 2 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TCR2EF.

What parts are used alongside the TCR2EF?

The 74LVC1G14, AP2553W6-7, MAX2837, MGA-81563 and RFFC5072 appear in the most repositories here.

How big is a typical board using the TCR2EF?

The median is 120 × 75 mm.

What is the most popular open source board using the TCR2EF?

By GitHub stars, Neapolitan by Josephrp, with 12 stars.

Can I simulate one of these boards using the TCR2EF before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part