4 open source boards using the TEA2025B

Real designs built with the TEA2025B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The TEA2025B in open source designs

The gallery holds 4 open source boards using the TEA2025B from 4 GitHub repositories; a typical one measures about 194.8 × 102.7 mm and carries around 154 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Snark barker by schlae.

What boards using the TEA2025B are built for

TEA2025B: common questions

Where can I find a TEA2025B reference design?

Each of the 4 boards on this page is a real design using the TEA2025B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TEA2025B?

The 74LS138, 74LS245, 74LS32, 74LS74 and 74LS08 appear in the most repositories here.

How big is a typical board using the TEA2025B?

The median is 194.8 × 102.7 mm, and 100% are two-layer designs.

What is the most popular open source board using the TEA2025B?

By GitHub stars, Snark barker by schlae, with 687 stars.

Can I simulate one of these boards using the TEA2025B before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part