8 open source boards using the TL7705A
Real designs built with the TL7705A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Cpu board
rjw57
99.1 × 99.1 mm68 parts2LMIT68ESP8266
Stargate
leomanes
335 × 218.6 mm274 parts2LGPL-3.018NXP
LFlex21
laurent-fr
180.3 × 120.7 mm77 parts2LNo license4JFF
herraa1
250 × 150 mm132 parts2LGPL-3.02Steuereinheit
stonedDiscord
259.7 × 80 mm236 parts2LNo license0Gide
felge1966
94.6 × 94.6 mm32 parts2LNo license0CPU6502
Creep69
145 × 85 mm39 parts2LNo license8Combined
rjw57
195.4 × 188 mm26 parts2LMIT68
How designs wire the TL7705A
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TL7705A connects to, and the resistors, capacitors and other passives placed on it.
- The REF pin has a capacitor to GND on 7 of 7 designs, most often 100 nF.
- The CT pin has a capacitor to GND on 7 of 7 designs, most often 1 µF (then 10 µF).
- The RESIN pin has a pull-up to 5V on 6 of 7 designs, most often 10 kΩ (then 330 Ω).
- The RESET pins have a pull-up to 5V on 6 of 7 designs, most often 10 kΩ (then 22 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| REFpin 1 | Connected to: Signal 100% |
|
| RESINpin 2 | Connected to: A connector 29% |
|
| CTpin 3 | Connected to: Signal 100% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| RESETpin 5, 6 | Connected to: A connector 29% · not connected 29% |
|
| SENSEpin 7 | Connected to: 5V 100% | — |
| VCCpin 8 | Connected to: 5V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Combined by rjw57, Stargate by leomanes, CPU6502 by Creep69 and LFlex21 by laurent-fr.
The TL7705A in open source designs
The gallery holds 8 open source boards using the TL7705A from 7 GitHub repositories; a typical one measures about 187.9 × 109.9 mm and carries around 73 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Cpu board by rjw57.
Parts used alongside the TL7705A
What boards using the TL7705A are built for
TL7705A: common questions
Where can I find a TL7705A reference design?
Each of the 8 boards on this page is a real design using the TL7705A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TL7705A REF pin connected?
The REF pin has a capacitor to GND on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the TL7705A.
How is the TL7705A CT pin connected?
The CT pin has a capacitor to GND on 7 of 7 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the TL7705A.
What pull-up resistor is used on the TL7705A RESIN pin?
The RESIN pin has a pull-up to 5V on 6 of 7 designs, most often 10 kΩ (then 330 Ω). Counted from the KiCad layouts of 7 open source designs using the TL7705A.
What parts are used alongside the TL7705A?
The 74HC138, YM2149, 74HC00, 74HC02 and 74HC04 appear in the most repositories here.
Which microcontrollers do boards using the TL7705A use?
Most are built on ESP8266 (1) and NXP (1).
How big is a typical board using the TL7705A?
The median is 187.9 × 109.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the TL7705A?
By GitHub stars, Cpu board by rjw57, with 68 stars.
Can I simulate one of these boards using the TL7705A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.