13 open source boards using the TPD2EUSB30ADRTR
Real designs built with the TPD2EUSB30ADRTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Shirley-FC-Dev-Board
Bare-Metal-Foundry
56 × 46 mm110 parts4LNo license31ESP32
PCB-Modular-Multi-Protocol-Hub
MbFredys
79.7 × 63.1 mm208 parts4LCERN-OHL-W-2.074reel
o7-machinehum
117.5 × 30 mm155 parts4LMIT3ESP32
EUB-04 Emiuet
emnyeca
297 × 102.4 mm251 parts2LNo license2LightPad v1
PaulSalz
367 × 163 mm745 parts2LMIT1ESP32
USBHIDKey
mikegoelzer
65 × 32 mm50 parts4LNo license1ESP32
Lamp-2
DodoZimmermann
147 × 139.9 mm248 parts6LMIT0FPGA
Gammapi zero
vikulin
65 × 30 mm142 parts4LSHL-2.10ESP32
ElevatorLift
Nickster44
90 × 90 mm113 parts4LNo license0ESP32
EdgeLink S3 Cellular
CDonohoe-Designs
56 × 52 mm93 parts4LNo license0Nordic nRF
NRF-MCU module
AnotherBuildCorner
69.8 × 30.8 mm76 parts4LNo license0RP2040/RP2350
Noctra-Devboard
lekangji
21 × 51 mm67 parts4LNo license0Nordic nRF
Hyper Wheel base
AnotherBuildCorner
95 × 68 mm75 parts4LNo license0
How designs wire the TPD2EUSB30ADRTR
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the TPD2EUSB30ADRTR connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| D+pin 1 | Connected to: A connector 92%, the microcontroller 42% |
|
| D-pin 2 | Connected to: A connector 92%, the microcontroller 42% |
|
| GNDpin 3 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Shirley-FC-Dev-Board by Bare-Metal-Foundry, PCB-Modular-Multi-Protocol-Hub by MbFredys, 4reel by o7-machinehum and EUB-04 Emiuet by emnyeca.
The TPD2EUSB30ADRTR in open source designs
The gallery holds 13 open source boards using the TPD2EUSB30ADRTR from 12 GitHub repositories; a typical one measures about 79.7 × 52 mm and carries around 113 components.
85% use four copper layers or more, and 31% carry an open source license.
The most starred is Shirley-FC-Dev-Board by Bare-Metal-Foundry.
Parts used alongside the TPD2EUSB30ADRTR
Microcontrollers on boards using the TPD2EUSB30ADRTR
What boards using the TPD2EUSB30ADRTR are built for
TPD2EUSB30ADRTR: common questions
Where can I find a TPD2EUSB30ADRTR reference design?
Each of the 13 boards on this page is a real design using the TPD2EUSB30ADRTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPD2EUSB30ADRTR use?
Most are built on ESP32 (6), Nordic nRF (2), FPGA (1) and RP2040/RP2350 (1).
How big is a typical board using the TPD2EUSB30ADRTR?
The median is 79.7 × 52 mm, and 15% are two-layer designs.
What is the most popular open source board using the TPD2EUSB30ADRTR?
By GitHub stars, Shirley-FC-Dev-Board by Bare-Metal-Foundry, with 31 stars.
Can I simulate one of these boards using the TPD2EUSB30ADRTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.