8 open source boards using the TPD8S009DSMR
Real designs built with the TPD8S009DSMR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Jetson-AI-Cam-CopperPilot
CopperPilot
78 × 55 mm268 parts8LCERN-OHL-P-2.09FPGA
Hardware for kintex
Singleboardcomputer
110 × 90 mm466 parts8LNo license1STM32
Jetson Xavier/Orin NX + PX4 Board
PranavNedunghat
139 × 57.4 mm478 parts8LApache-2.00STM32
V1.3
PranavNedunghat
66 × 8.8 mm475 parts8LApache-2.00Ioboard head
jorisplusplus
119.8 × 129.8 mm225 parts4LNo license0STM32
V1.1 version control
PranavNedunghat
66 × 8.8 mm473 parts8LApache-2.00STM32
V1.1 XT30 version
PranavNedunghat
4.5 × 57.9 mm473 parts8LApache-2.00STM32
V1.2
PranavNedunghat
66 × 8.8 mm471 parts8LApache-2.00
The TPD8S009DSMR in open source designs
The gallery holds 8 open source boards using the TPD8S009DSMR from 4 GitHub repositories; a typical one measures about 72 × 56.2 mm and carries around 472 components.
100% use four copper layers or more, and 75% carry an open source license.
The most starred is Jetson-AI-Cam-CopperPilot by CopperPilot.
Parts used alongside the TPD8S009DSMR
What boards using the TPD8S009DSMR are built for
TPD8S009DSMR: common questions
Where can I find a TPD8S009DSMR reference design?
Each of the 8 boards on this page is a real design using the TPD8S009DSMR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPD8S009DSMR?
The 74LVC1G07GV,125, AT24CS01-ST, HD3SS3220RNHT, LMQ62440BPPQRJRRQ1 and MAX3051EKA appear in the most repositories here.
Which microcontrollers do boards using the TPD8S009DSMR use?
Most are built on STM32 (5) and FPGA (1).
How big is a typical board using the TPD8S009DSMR?
The median is 72 × 56.2 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPD8S009DSMR?
By GitHub stars, Jetson-AI-Cam-CopperPilot by CopperPilot, with 9 stars.
Can I simulate one of these boards using the TPD8S009DSMR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.