15 open source boards using the TTGO_TDisplay
Real designs built with the TTGO_TDisplay, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2kChainlinkDriverTester
orgTestCodacy11KRepos110MB
198.1 × 95.3 mm123 parts2LApache-2.00ChainlinkDriverTester
kiwonbyun
198.1 × 95.3 mm123 parts2LApache-2.00ChainlinkDriverTester
rossbb
198.1 × 95.3 mm123 parts2LApache-2.00ChainlinkDriverTester
nintando64
198.1 × 95.3 mm123 parts2LApache-2.00ChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkBase
orgTestCodacy11KRepos110MB
98.4 × 190.5 mm119 parts2LApache-2.00ChainlinkBase
kiwonbyun
98.4 × 190.5 mm119 parts2LApache-2.00ChainlinkBase
nintando64
98.4 × 190.5 mm119 parts2LApache-2.00ChainlinkBase
rossbb
98.4 × 190.5 mm119 parts2LApache-2.00ChainlinkBuddyTDisplay
scottbez1
74.9 × 49.5 mm8 parts2LApache-2.04.2kChainlinkBuddyTDisplay
kiwonbyun
74.9 × 49.5 mm8 parts2LApache-2.00ChainlinkBuddyTDisplay
rossbb
74.9 × 49.5 mm8 parts2LApache-2.00ChainlinkBuddyTDisplay
nintando64
74.9 × 49.5 mm8 parts2LApache-2.00ChainlinkBuddyTDisplay
orgTestCodacy11KRepos110MB
74.9 × 49.5 mm8 parts2LApache-2.00
How designs wire the TTGO_TDisplay
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TTGO_TDisplay connects to, and the resistors, capacitors and other passives placed on it.
- Pin 3 has a pull-up to 3.3V on 5 of 5 designs, most often 1 kΩ.
- Pin 4 has a pull-up to 3.3V on 5 of 5 designs, most often 1 kΩ.
- Pin 16 has a resistor to GND on 5 of 5 designs, most often 15 kΩ.
- Pin 1 is tied to GND on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: GND 100% | — |
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: INA219BxD 100%, MCP23017_SS 100% |
|
| Pin 4 | Connected to: INA219BxD 100%, MCP23017_SS 100% |
|
| Pin 7 | Connected to: Not connected 100% | — |
| Pin 9 | Connected to: Not connected 100% | — |
| Pin 10 | Connected to: GND 100% | — |
| Pin 11 | Connected to: GND 100% | — |
| Pin 12 | Connected to: 3.3V 100% | — |
| Pin 13 | Connected to: 5V 100% | — |
| Pin 14 | Connected to: GND 100% | — |
| Pin 16 | Connected to: MCP23017_SS 100% |
|
| Pin 21 | Connected to: Not connected 100% | — |
| Pin 24 | Connected to: Not connected 100% | — |
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ChainlinkBase by scottbez1, ChainlinkBase by kiwonbyun, ChainlinkBase by nintando64 and ChainlinkBase by orgTestCodacy11KRepos110MB.
The TTGO_TDisplay in open source designs
The gallery holds 15 open source boards using the TTGO_TDisplay from 5 GitHub repositories; a typical one measures about 98.4 × 95.3 mm and carries around 119 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is ChainlinkDriverTester by scottbez1.
Parts used alongside the TTGO_TDisplay
What boards using the TTGO_TDisplay are built for
TTGO_TDisplay: common questions
Where can I find a TTGO_TDisplay reference design?
Each of the 15 boards on this page is a real design using the TTGO_TDisplay. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the TTGO_TDisplay pin 3?
Pin 3 has a pull-up to 3.3V on 5 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the TTGO_TDisplay.
What pull-up resistor is used on the TTGO_TDisplay pin 4?
Pin 4 has a pull-up to 3.3V on 5 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the TTGO_TDisplay.
What resistor goes on the TTGO_TDisplay pin 16?
Pin 16 has a resistor to GND on 5 of 5 designs, most often 15 kΩ. Counted from the KiCad layouts of 5 open source designs using the TTGO_TDisplay.
What parts are used alongside the TTGO_TDisplay?
The AP7361C-33E, Buck, INA219BxD, LM7805_TO220 and MCP23017_SS appear in the most repositories here.
How big is a typical board using the TTGO_TDisplay?
The median is 98.4 × 95.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the TTGO_TDisplay?
By GitHub stars, ChainlinkDriverTester by scottbez1, with 4,156 stars.
Can I simulate one of these boards using the TTGO_TDisplay before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.