3 open source boards using the USB7206CT/KDX
Real designs built with the USB7206CT/KDX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Odeck
KarpelesLab
130 × 89 mm772 parts6LCERN-OHL-P-2.00RP2040/RP2350
Odock
KarpelesLab
130 × 89 mm772 parts6LCERN-OHL-P-2.00Raspberry Pi
Iasis
hydazz
130 × 100 mm636 parts6LApache-2.00
The USB7206CT/KDX in open source designs
The gallery holds 3 open source boards using the USB7206CT/KDX from 3 GitHub repositories; a typical one measures about 130 × 89 mm and carries around 772 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Odeck by KarpelesLab.
Parts used alongside the USB7206CT/KDX
Microcontrollers on boards using the USB7206CT/KDX
USB7206CT/KDX: common questions
Where can I find a USB7206CT/KDX reference design?
Each of the 3 boards on this page is a real design using the USB7206CT/KDX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the USB7206CT/KDX?
The LM74502DDFR, 74LVC1G17W5-7, AT24C512C-SSHD-T, CYPM1321-97BZXIT and INA226AIDGSR appear in the most repositories here.
Which microcontrollers do boards using the USB7206CT/KDX use?
Most are built on RP2040/RP2350 (2) and Raspberry Pi (1).
How big is a typical board using the USB7206CT/KDX?
The median is 130 × 89 mm, and 0% are two-layer designs.
What is the most popular open source board using the USB7206CT/KDX?
By GitHub stars, Odeck by KarpelesLab, with 0 stars.
Can I simulate one of these boards using the USB7206CT/KDX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.