11 open source boards using the W25Q80DVSSIG

Real designs built with the W25Q80DVSSIG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the W25Q80DVSSIG

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the W25Q80DVSSIG connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF).
CSpin 1Connected to: The microcontroller 82%, a connector 55%
  • Pull-up to 3.3V on 36% · 10 kΩ (2), 5.6 kΩ (1), 4.7 kΩ (1)
GNDpin 4Connected to: GND 100%
VCCpin 8Connected to: 3.3V 91%
  • Decoupling capacitor on 100% · 100 nF (8), 1 µF (3), 10 µF (1)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Telemetry Onboard by Spaceflight-Rocketry-Giessen-e-V, TsuraraGB Main by rniwase, ${TITLE} by Josephrp and MainBoard by sabas1080.

The W25Q80DVSSIG in open source designs

The gallery holds 11 open source boards using the W25Q80DVSSIG from 11 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 138 components.

64% use four copper layers or more, and 73% carry an open source license.

The most starred is Telemetry Onboard by Spaceflight-Rocketry-Giessen-e-V.

Microcontrollers on boards using the W25Q80DVSSIG

W25Q80DVSSIG: common questions

Where can I find a W25Q80DVSSIG reference design?

Each of the 11 boards on this page is a real design using the W25Q80DVSSIG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the W25Q80DVSSIG VCC pin?

The VCC pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the W25Q80DVSSIG.

What parts are used alongside the W25Q80DVSSIG?

The DEA162400HT-8004B1, LP0603A1880ANTR, LPC4320FBD144,551, MGA-81563-TR1G and RFFC5072TR7 appear in the most repositories here.

Which microcontrollers do boards using the W25Q80DVSSIG use?

Most are built on NXP (5), RP2040/RP2350 (3), AVR/Arduino (1) and FPGA (1).

How big is a typical board using the W25Q80DVSSIG?

The median is 120 × 75 mm, and 36% are two-layer designs.

What is the most popular open source board using the W25Q80DVSSIG?

By GitHub stars, Telemetry Onboard by Spaceflight-Rocketry-Giessen-e-V, with 27 stars.

Can I simulate one of these boards using the W25Q80DVSSIG before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part